Parts Needed to Add 3rd Crossbar to Rhino Rack Aero Bar Roof Rack for Camper Shells

Question

Question:

Aero bar roof rack overall net height from shell to top of cross bar. I want to purchase an additional cross bar to mount to cab, and be the same height.

asked by: Kevin

1

Helpful Expert Reply:

The overall height of the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B is 5" tall.

If you're looking to add a 3rd crossbar to the tracks on the # Y02-480B and not the cab you'll want to use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H and the Rhino-Rack Vortex Aero Crossbar - Aluminum - Black - 54" Long # RRVA137B.

expert reply by: Erik B

1

Height of Rhino Rack track mounted roof rack
(click to enlarge)

Answer 1

The best option for a ladder rack to carry tools and other construction supplies with your 2023 Chevy Silverado 1500 is the Thule TracRac TracONE Truck Bed Ladder Rack item #TH27000XTB. This ladder rack fits all bed lengths of the 2023 1500, 5-3/4,…

view full answer...

Answer 2

To carry lumber with your 2023 Toyota Tacoma you are going to want the Thule TracRac TracONE item #TH27000XTB. This fits both the 5' beds and 6' beds with the deck rail system. This ladder rack system has a no drill installation method and a…

view full answer...

Answer 3

If you are talking about closing the gap between the brackets that attached to the side rails on your 2005 GMC Canyon then no, you will not want to bring those together. You will want the 4 upright bars on the T-Rac Pro2 Truck Bed Ladder Rack w/…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 6

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...

Answer 9

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

We do! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B on your 2024 Chevy Silverado 1500 topper. To get this installed you'll have to put some holes in the topper for the rails, but it comes with sealant and…

view full answer...

Answer 12

Hey Gary, so the Yakima 54" Tracks for Roof Racks #Y26RR that you referenced are compatible with your setup as they provide the standard dimension roof tracks that your Sherpa Crows Nest was designed to fit. With that said the correct T-bolt…

view full answer...

Parts Needed to Add 3rd Crossbar to Rhino Rack Aero Bar Roof Rack for Camper Shells

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching