Does Bestop Tigertop B5140401 For 1954 Jeep CJ-3B Include The Bow System?

Question

Question:

Do you provide for purchase the bow system required for the best top installation ? Also is a plan provided for the rivet installation ? Should I take windshield height to back rail measurements to ensure proper fit? And should I send those measurements here on this site? Thanks

asked by: Adam

0

Expert Reply:

I would be happy to clear things up for you!

The Bestop TigerTop # B5140401 you were looking at for your 1954 Jeep CJ-3B includes the new bow system and everything needed to get this top installed so there is nothing to purchase separately.

This kit is designed to use snaps, not rivets, so there are no plans for installing rivets as they are not recommended.

There is also no need to measure the windshield height as that is used to identify your Jeep to make sure you get the correct kit. Since you already know you have a 1954 CJ-3B we already are able to confirm you will need the # B5140401.

I included a link to the written instructions of the # B5140401 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

If your 1962 Jeep Willys is a CJ-3B model then we do have a full top that you can use. The Bestop Tigertop, #B5140401, soft top comes with the fabric and all of the hardware needed to install it on your Jeep as long as you have the existing…

view full answer...

Answer 2

The Dometic model B59516 is showing up as a Brisk II 15K BTU unit so the only thing you'll need to check is what style connector your current unit has. If you remove the cover for the air distribution box inside the trailer you should see…

view full answer...

Answer 3

We do have a list of dealers in the Orlando area that could install the Hidden Hitch by Draw-Tite #DT66GR and Curt #C56093 on your 2022 Ford Explorer. I have attached a link below showing top dealers in the Orlando area. You can also find this link…

view full answer...

Answer 4

The Curt T-Connector Vehicle Wiring Harness item #C56093 has to be wired directly to the battery no matter what type of lights your Explorer or trailer has. This direct wire is what powers the converter box that controls the signal sent to the…

view full answer...

Answer 5

I can confirm the Curt #C56093 will fit a 2021 Ford Explorer. The M at the 10th position in your VIN simply means your vehicle is indeed a 2021 model. Though we do not have a video of this being installed on a 2021 Explorer, I did include a video of…

view full answer...

Answer 6

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...