Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56093 Review Video

When some trailer lights are not working and others are not working like they are supposed to it can be an indication of a ground problem. But before looking at the wiring on the trailer you can test the vehicle side to see if it is providing the…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is a trailer hitch that fits a 2020 Ford Explorer, the etrailer Trailer Hitch Receiver #e29YR, which is a Class III hitch with a 2" receiver, 6,000 lb towing capacity and 600 lb tongue weight capacity. This hitch will rest neatly…

The easiest way to add reflectors to the 24x60 etrailer.com Cargo Carrier #E98874 that you referenced is going to be with conspicuity tape like part #RE18T. This gives you a reflector sticker that gives you overall dimensions of 18 inches by 2 inches…

You can still add a 4-way wiring harness to your 2020 Ford Police Interceptor, though I did some checking and there isn't a plug-in type of option. So what that means is you would need to use a hardwire wiring harness, which is the following: -…

For a 2023 Ford Explorer you would need the Curt T-Connector Vehicle Wiring Harness #C56093 if you did not have the factory trailer connector. If you did you would instead need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package…

I checked with Curt and the Curt Trailer Hitch Receiver part #CU78FR is listed as a fit a 2020 Ford Explorer with kick sensors. That said, the fit with the kick sensors is tight so there are a few things you need to do during installation to ensure…

In order to activate the reverse solenoid on the brake actuator you will need to converter the 4-way trailer wiring harness you have to a 5-way using the Curt Trailer Connector Adapter part #C57187. This adapter will then plug into the 4-way on the…

I checked with Curt and they list wiring harness #C56278 as a fit for all styles of the 2013 Ford Explorer so that would include models with or without the factory tow package.

The Blue Ox SwayPro and Blue Ox TrackPro Weight Distribution Systems are both great options. The better of the two is the SwayPro as this is their flagship system. This system doesn't use friction as much like the TrackPro so it will be less…

I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…

I would recommend that Blue Ox TrackPro #BLU77FR simply because it does not have lift chains like the SwayPro #BXW1006. Both will do a great job but the TrackPro will have a little less movement because of the absence of drop chains. Blue Ox is a…