Will the Replacement Hitch Pin Bolt for Yakima HoldUp Fit on a Toyota Hitch Receiver Tube
Question:
Will the Hitch Bolt and Pin PN. Y8890200 fit my wider 2inch receiver on my Toyota truck? I have a older Yakima Roc 2 Bike Rack, the original Hitch Bolt and Pin is too short. It looks likes like this should fit.
asked by: Ken W
Expert Reply:
I have actually seen this issue before since the 2 inch receivers on Toyota trucks and SUVs have a slightly larger diameter on the outside of the receiver tube than most typical 2 inch hitches; it's partially the powder coating but the steel itself is also a bit thicker.
With that said, the Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers # Y8890200; they're usually about 2-7/8" overall and the useable length of the # Y8890200 is 3-1/2" so this bolt should work without issues. My contact at Yakima says that it will have the same thread pitch and diameter as the Roc 2 used, but is approximately 1 inch longer overall.
I do recommend measuring the outside of the receiver tube to make sure it's not larger than the 2-7/8" I mentioned, but as long as it's less than 3-1/2" you will be able to use this hitch pin.
Product Page this Question was Asked From
Replacement Hitch Bolt for Yakima HoldUp 2, OnRamp, and BigHorn Bike Racks and DryDock Canoe Carrier
- Accessories and Parts
- Hitch Bike Racks
- Hardware
- BigHorn
- HoldUp
- OnRamp
- Yakima
more information >
Continue Researching
- Shop: Replacement Hitch Bolt for Yakima HoldUp 2, OnRamp, and BigHorn Bike Racks and DryDock Canoe Carrier
- Shop: Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack
- Shop: Replacement Anti-Rattle Hitch Bolt for Yakima BigHorn, FlipSide, DoubleDown, and SwingDaddy Racks
- Q&A: Thread Diameter and Size plus Bolt Head Dimensions for the Replacement Hitch Bolt # Y8890200
- Q&A: Longer Yakima Hitch Pin Bolt for Wider 2 inch Trailer Hitch Application
- Q&A: Replacement Hitch Bolt with Attached Wrench for Yakima Bike Rack
- Q&A: Differences Between # Y8890176 and # Y8890200 Bolts
- Q&A: Length and Diameter of Yakima Threaded Hitch Bolt
- Q&A: Replacement Hitch Bolt and Nut Retainer for Yakima FourTimer Bike Rack
- Q&A: What Is Bolt Size Of Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Bike Rack # Y8890200
- Search Results: y8880128
- Search Results: 8780022
- Video: Yakima Hitch Bike Racks Y8890200 Review
- Shop: Replacement 2" Anti-Rattle Hitch Bolt Assembly for Yakima Bike Racks and DryDock Load Assist
- Shop: Replacement Threaded Hitch Bolt for SportRack Bike Racks and Cargo Carriers
- Shop: Replacement Mounting Hardware for Yakima HoldUp Plus 2 Adapter
- Shop: Replacement Anti-Rattle Retainer Nut for Yakima HoldUp 2" Bike Carriers - Qty 1
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller