Recommended LED Trailer Lighting For Over 80 Inch Wide EZ Loader Boat Trailer
Question:
I have a EZ Loader boat trailer. Im wanting to replace all of the lights and wiring on it, or at least get all the lights working. Would prefer LED lights. The trailer is over 80 and there are both red and orange clearance lights on plastic fenders. Other than a $260 new kit from EZ loader, I cant seem to find a kit that has everything I need. I definitely need new tail lights, that center lightbar on the back of the trailer and the red and orange clearance lights on the plastic fenders. Do you have anything that will work?
asked by: Josh
Expert Reply:
For your trailer wiring, I recommend the Submersible LED Trailer Light Kit w 25' Wiring Harness # TL16RK along with the Identification Light Kit for Trailers over 80" Wide - Submersible - 3 LEDs - Red # MCL22RK3B. I recommend the Sealed, Thin Line LED Fender Clearance Light for Trailers Over 80" Wide, 10 Diode - Amber / Red # MCL65ARB for your fender lights.
Products Referenced in This Question
Identification Light Kit for Trailers over 80" Wide - Submersible - 3 LEDs - Red
- Trailer Lights
- Clearance Lights
- Rear Clearance
- ID Bar
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 3/4 Inch Diameter
- Red
- Optronics
more information >
Optronics Thinline LED Trailer Fender Light for Trailers Over 80" Wide - 10 Diodes - Amber/Red
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 4L x 1W Inch
- Red and Amber
- Optronics
more information >
Product Page this Question was Asked From
Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Trailer Lights
- Tail Lights
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Kit
- Surface Mount
- Submersible Lights
- Incandescent Light
- 8L x 3W Inch
- Red and Amber
- Optronics
more information >
Continue Researching
- Q&A: How to Power Optronics LED Trailer License Plate Light on Cargo Carrier
- Q&A: How to Pick Leaf Springs for a Trailer
- Video: Review of Optronics Trailer Lights - Clearance Lights - OPT29FR
- Shop: Mud Flaps
- Search Results: hub grease cap
- Search Results: hub dust cover
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Search Results: ce smith hub
- Shop: Trailer Wiring
- Q&A: Dimension from Spindle Center to Frame Mounting Point on Timbren # A20RS545 Axle-Less Suspension
- Shop: 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Shop: Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Shop: Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens
- Shop: Dexter Heavy-Duty Shackle Link for 1-3/4" Wide Double Eye Spring Suspension Kit - Qty 1
- Shop: Straight Equalizer for 1-3/4" Double-Eye Springs - 5-1/2" Long - 9/16" Center Hole
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98"
- Video: Redline Trailer Suspension SP01-160 Review
- Video: Wesbar Wiring - Trailer Connectors - 54000-026 Review
- Video: Dexter Trailer Suspension Kit Replacement Shackle Link with Bolts Review
- Video: Optronics Trailer Clearance Side Marker Lights Single Wire Plug Review
- Video: Kodiak Trailer Bearings Races Seals Caps - Caps - XLPROLUBE1980 Review
- Video: Review of Optronics Trailer Lights - A91LW
- Search Results: never fail bushings
- Search Results: straight equalizer
- Q&A: Recommended LED Clearance Light that is Red and Amber
- Q&A: Recommended Replacement for Optronics MCL61ARB
- Q&A: Fender Bracket for Optronics Thinline LED Trailer Light # MCL65ARB
- Q&A: How To Wire LED Trailer License Plate Light For Cargo Carrier To A 4 Way Flat