Recommended Load Range for Trailer Tires Towing Subaru Outback on 16 Foot Aluminum Car Trailer

Question

Question:

Hi, I have a 16 ft aluminum car trailer. I tow a Subaru Outback on it. I have been told I need to upgrade my tires to load range d. What should I be looking for in a tire for this trailer? I tow it on the highway behind a c class RV. Thanks

asked by: Joshua W

0

Expert Reply:

In order to determine if you need to upgrade your tires to a different load range with a higher capacity some additional information would be necessary.

First, I would need to know what size tire you have. The load range capacities are different depending on the size of the tire. In addition to this, it is necessary to know the weight of your trailer and vehicle. The only reason you would need to upgrade your tire is if you are exceeding the capacity of your current tires.

I will use the Provider # TR20514 you looked at as an example. This 205/75-14 tire has a load range of C, which means a maximum load of 1,760 lbs at 50 psi. This is going to be the capacity per tire so if you have four tires it will be 7,040 lbs which is likely well over the weight of your trailer and vehicle. If this is the case there would be no reason to get a different tire.

I have attached a helpful article on tire size that lists the load range for each size and the maximum capacity for each load range for your reference.

expert reply by: Robin H

0

Answer 1

The Coil SumoSprings Custom Helper Springs part #CSS-1125R are a fit for a 2022 Subaru Outback Wagon Wilderness. They are a great option to help stiffen the rear suspension while towing or hauling heavy loads. They are also the confirmed option we…

view full answer...

Answer 2

That's a really good question, but the Curt Echo Mobile Trailer Brake Controller #C51180 will absolutely not fall out of the 7-way on your 2019 Hyundai Santa Fe. There are a couple of reasons for this, starting with the fact that the connection…

view full answer...

Answer 3

I have a great option for you. The Curt Echo Wireless Trailer Brake Controller #C51180 is going to be as easy of an install as you will get for a brake controller for your 2022 Honda Passport. The reason this will be an easier install is because it…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...