What Replacement Hinges Do I Need for My Sears X-Cargo Carrier?

Question

Question:

We have a 1980s era Sears xcargo carrier. Unlike newer models, this did not have spring lifters. Instead the lifters were all metal and locked once opened. One of these has broken and we are hoping to get replacements. Any information would be appreciated. Thanks!

asked by: Chris

0

Expert Reply:

If you are looking for replacement spring hinges for your Sears X-Cargo box, you will need a Replacement Spring Hinge # SR03810 for your single broken hinge. I went ahead and attached a picture of a Sears X-Cargo Box that has both hinges replaced with the # SR03810.

expert reply by: Bob C

0

Replacement Hinge # SR03810 On Sears X-Cargo Carrier
(click to enlarge)

Answer 1

Yes, the Replacement Spring Hinge #SR03810 is going to be the correct spring hinge for your grey and white Sears X-Cargo carrier. Using the picture you included I was able to verify that this was the correct part. I have included a review and picture…

view full answer...

Answer 2

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. No drilling would be…

view full answer...

Answer 3

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. I included a video…

view full answer...

Answer 4

We have replacement hinges for the Sears X-Cargo roof boxes with the part #SR03810.

view full answer...

Answer 5

Thule manufactured the X Cargo boxes for Sears. According to my Thule representative, the actual metal hinges are part #SR03396, which are sold individually. The spring loaded lifter is the part #SR03810 you referenced. I've edited a diagram for…

view full answer...

Answer 6

It sounds like you might be looking for the Replacement Spring Hinge for SportRack Explorer or SkyLine Cargo Box #SR03810, which we've seen used on Sears X-Cargo boxes. If this isn't the part you're looking for and can provide a photo of…

view full answer...

Answer 7

We may have the hinge you are looking for. There were several versions of the Sears X-Cargo roof cargo box but I do believe that #SR03810 is the one that will fit your cargo box. If yours do not look like this let me know.

view full answer...

Answer 8

I am not aware of any direct fit mounting hardware kits available for the Sears X Cargo Roof Mounted Cargo Boxes due to their age. As you mentioned, you will need to drill holes in order to mount it onto a set of crossbars. The u-bolts kits are…

view full answer...

Answer 9

Thank you for the photo of the hinge you need to replace on your Sears X-Cargo Box. The replacement hinge you need is part #SR03810. This item is ordered individually so I recommend you check the other side to make sure it doesn't need to also be…

view full answer...

Answer 10

We do offer a replacement Spring Hinge for the Sears X-Cargo Sport-20 rooftop boxes, part #TH14933. The part #TH14936 you referenced is not an ideal fit for your Sears X-Cargo Sport-20 due to the stiffness of the spring.

view full answer...

Answer 11

To replace the mounting hardware on your Sears X-Cargo Sport 20 cargo carrier you can use the Replacement Hardware Kit #TH05603 to re-mount your cargo carrier on most factory and aftermarket roof rack crossbars. To replace the lock, you'll want…

view full answer...

Answer 12

For your Sears X-Cargo cargo box, you can use the Replacement Hardware Kit for Searsbox Cargo Box #TH05603. This kit includes everything you need to mount your cargo box to the OEM bars on your 2018 Pilot.

view full answer...

What Replacement Hinges Do I Need for My Sears X-Cargo Carrier?

Product Page this Question was Asked From

Continue Researching