Replacement Hinge for a Sears X-Cargo Roof Cargo Box

Question

Question:

I need a replacement hinge for my Sears x-cargo model 300-7261 There are 2 hinges that keep it open when you open it up

asked by: Jim

0

Expert Reply:

We may have the hinge you are looking for. There were several versions of the Sears X-Cargo roof cargo box but I do believe that # SR03810 is the one that will fit your cargo box. If yours do not look like this let me know.

expert reply by: Michael H

0

Answer 1

You will want to look on the face of the lock core to determine if there is a key code which is typically 4 digits. If so, then you can simply go onto our site and search THKEYN followed with the key code. For example, #THKEYN2862 is the correct key…

view full answer...

Answer 2

We have previously confirmed with Thule (the manufacturer of this cargo box) that the correct replacement mounting hardware for your Sears X-Cargo 28-7271 is the Replacement Hardware Kit #SR05587 which does include the U-bolts required for this cargo…

view full answer...

Answer 3

The Sears X-Cargo Cargo Box has been discontinued for awhile and replacement parts are no longer available. The Replacement Mounting Strap part #SR02918 is designed to run through the doors along the inside roof of the vehicle. If you would like to…

view full answer...

Answer 4

You are correct, the Karrite Explorer and Sportrack Explorer are the same cargo box. We do offer a few individual replacement parts for this product like the Replacement Latch #03347 referenced in your question. I recommend the SportRack Replacement…

view full answer...

Answer 5

I would need the number on the key to determine the exact key for your Sears X-Cargo Box - 300.7260. You can get a Replacement Lock Core and Key #SR03807 and replace the lock so that you can lock the cargo box. Make sure your current lock resembles…

view full answer...

Answer 6

Thank you for the photo of the hinge you need to replace on your Sears X-Cargo Box. The replacement hinge you need is part #SR03810. This item is ordered individually so I recommend you check the other side to make sure it doesn't need to also be…

view full answer...

Answer 7

It sounds like you might be looking for the Replacement Spring Hinge for SportRack Explorer or SkyLine Cargo Box #SR03810, which we've seen used on Sears X-Cargo boxes. If this isn't the part you're looking for and can provide a photo of…

view full answer...

Answer 8

Thule manufactured the X Cargo boxes for Sears. According to my Thule representative, the actual metal hinges are part #SR03396, which are sold individually. The spring loaded lifter is the part #SR03810 you referenced. I've edited a diagram for…

view full answer...

Answer 9

Yes, the Replacement Spring Hinge #SR03810 is going to be the correct spring hinge for your grey and white Sears X-Cargo carrier. Using the picture you included I was able to verify that this was the correct part. I have included a review and picture…

view full answer...

Answer 10

We have replacement hinges for the Sears X-Cargo roof boxes with the part #SR03810.

view full answer...

Answer 11

I am not aware of any direct fit mounting hardware kits available for the Sears X Cargo Roof Mounted Cargo Boxes due to their age. As you mentioned, you will need to drill holes in order to mount it onto a set of crossbars. The u-bolts kits are…

view full answer...

Answer 12

If you are looking for replacement spring hinges for your Sears X-Cargo box, you will need a Replacement Spring Hinge #SR03810 for your single broken hinge. I went ahead and attached a picture of a Sears X-Cargo Box that has both hinges replaced with…

view full answer...