Correct Replacement Hinge for a Sears X-Cargo Carrier

Question

Question:

is Item # SR03810 the correct replacement lifter for 80s vintage grey and white sears X-cargo

asked by: Klite12

0

Expert Reply:

Yes, the Replacement Spring Hinge # SR03810 is going to be the correct spring hinge for your grey and white Sears X-Cargo carrier. Using the picture you included I was able to verify that this was the correct part. I have included a review and picture from another person that has the same carrier.

"No problem installing fit just like original parts works great .Thanks ."

expert reply by: Scott S

0

Carrier Review Photo
(click to enlarge)

NBR's Carrier
(click to enlarge)

Answer 1

If you are looking for replacement spring hinges for your Sears X-Cargo box, you will need a Replacement Spring Hinge #SR03810 for your single broken hinge. I went ahead and attached a picture of a Sears X-Cargo Box that has both hinges replaced with…

view full answer...

Answer 2

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. No drilling would be…

view full answer...

Answer 3

Thule manufactured the X Cargo boxes for Sears. According to my Thule representative, the actual metal hinges are part #SR03396, which are sold individually. The spring loaded lifter is the part #SR03810 you referenced. I've edited a diagram for…

view full answer...

Answer 4

Thank you for the photo of the hinge you need to replace on your Sears X-Cargo Box. The replacement hinge you need is part #SR03810. This item is ordered individually so I recommend you check the other side to make sure it doesn't need to also be…

view full answer...

Answer 5

It sounds like you might be looking for the Replacement Spring Hinge for SportRack Explorer or SkyLine Cargo Box #SR03810, which we've seen used on Sears X-Cargo boxes. If this isn't the part you're looking for and can provide a photo of…

view full answer...

Answer 6

It's a newer style of latch, but Thule has said that their replacement latch part #03347 that you referenced has been confirmed to work on the older Sears X Cargo Carriers like what you have.

view full answer...

Answer 7

Some of our replacement parts for SportRack or Thule cargo boxes will fit with some Karrite boxes but we never actually carried the Karrite boxes so I'd need to see a picture of the hinge you are talking about to see if we have anything that…

view full answer...

Answer 8

For starters, the vast majority of cargo boxes and replacement mounting hardware for cargo boxes will not work on factory crossbars for a Nissan Xterra as they are very large in comparison to the standard crossbar sizes that these cargo boxes and…

view full answer...

Answer 9

Yes, for a replacement key for your Sears Sport 20-SV carrier you would want the Replacement Key part #THKEYN2826.

view full answer...

Answer 10

In order to get the correct replacement key for your Sears Sport 20-SV Cargo Box you will need to look on the lock core for a three digit number. Once you have this number you can then search on our site for part THKEYN###with the ###being the number…

view full answer...

Answer 11

The Replacement Mounting Strap with Buckle for SportRack Explorer Cargo Box #SR02918 should great for your X-Cargo roof box. These straps are 1" wide x 40-3/4" long and many people have used them on X-Cargo carriers. You will want 4 of…

view full answer...

Answer 12

I am not aware of any direct fit mounting hardware kits available for the Sears X Cargo Roof Mounted Cargo Boxes due to their age. As you mentioned, you will need to drill holes in order to mount it onto a set of crossbars. The u-bolts kits are…

view full answer...

Correct Replacement Hinge for a Sears X-Cargo Carrier

Product Page this Question was Asked From

Continue Researching