Adjustable Hitch Receiver for a 2021 Taxa Overland Cricket Trailer

Question

Question:

Im wondering about the center to center dimensions of the mountings holes on this hitch. Im working with a 2021 Taxa Overland Cricket trailer and want to add a 2inch receiver for bikes rack at the back. The C- channel frame is 46-1/2inch center to center. Maybe you have another option, I have looked at some of your adjustableinch hitches, maybe the Curt would work. The load would only be a Thule bike rack with 2 bikes

asked by: Glenn O

0

Expert Reply:

I have a solution for your 2021 Taxa Overland Cricket Trailer but The Curt Trailer Hitch Receiver item # 13932 is a custom fit hitch receiver for 1999-2007 GM fullsize trucks. That receiver will probably not fit on your trailer.

I recommend the Curt Adjustable Trailer Hitch Receiver item # C13701. This hitch receiver will adjust up to 51" wide so it will definitely accomodate your 46 1/2 inch frame. This is a class III 2" hitch receiver and has a 500 lbs tongue weight for your bikes and Thule rack. This is the highest maximum tongue weight of the adjustable receivers.

expert reply by: Jerred H

0

Answer 1

In order to carry a bike rack on the back of your Taxa Cricket travel trailer with 40" between the frame members you can use the Curt Adjustable Trailer Hitch #C13701 which will fit on trailer frames between 18" and 51"…

view full answer...

Answer 2

If you have the stock bumper then the hitches made to fit the stock bumper would work well for you. For that we have the etrailer.com hitch part #e98849 as a confirmed fit. This won't fit behind the license plate though. The roll pan bumper…

view full answer...

Answer 3

When it comes to installing a trailer hitch on your 2003 Chevrolet Silverado 1500 with a roll pan bumper I recommend The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch #e82AR which is confirmed to fit your…

view full answer...

Answer 4

The only roll pan bumper-compatible receiver hitch we offer for a 2001 Chevy Silverado is a Class III, part #13932. A fold down license plate holder would be a handy accessory. I've linked to an install video for the #13932 hitch.

view full answer...

Answer 5

From the top of the mounting brackets to the top of the crosstube on the Curt Adjustable Width Trailer Hitch Receiver for RVs #C13702 measures about 2" and then from the crosstube to the end of the receiver measures about 6". I…

view full answer...

Answer 6

The highest rated hitch we carry for a trailer is a Class III with a maximum towing capacity of 5,000 lbs and a max tongue weight capacity of 500 lbs. The Curt #C13702 will only fit on box frame, C-channel frame, or I-beam frames that are between…

view full answer...

Answer 7

You are correct. For the 2001 Chevy Silverado 1500, the Curt #13932 is the only available hitch that can be used with the roll pan bumper. If you wanted to use one of the hitches designed to circumvent the deep drop bumpers that were often found on…

view full answer...

Answer 8

The hitch will work on a truck that's equipped with a body lift, but the receiver probably won't line up with the license plate well in your roll pan because the space between the frame and truck body has increased. Where the receiver will…

view full answer...

Answer 9

There are usually a couple of indicators that a weight distribution hitch is going to be helpful when towing, but it usually starts to come into play when your trailer weight (GTW) is more than 50% of your vehicle's weight (GVWR), which…

view full answer...

Answer 10

If you're looking for a 1-1/4" hitch I recommend using the Curt Class II #C12136 because of the durable powder coating that will help keep your hitch strong and avoid chances of corrosion. This Curt hitch is also a few pounds lighter than…

view full answer...

Adjustable Hitch Receiver for a 2021 Taxa Overland Cricket Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching