What Is the Largest Diameter Round or Square Crossbar the Inno Gravity Ski Carrier Will Fit

Question

Question:

I am having a difficult time finding a ski rack that will fit on my barricade roof rack. round crossbars 1.5 inches height and width. Will Inno Gravity ski carrier fit these round crossbars?

asked by: Melinda B

0

Expert Reply:

Yes. We've previously determined through Inno that the Inno Gravity Ski and Snowboard Carrier # INA952 will fit on square crossbars up to 2" x 2", so it will also fit on round roof crossbars with a 1-1/2" or 1-3/4" diameter.

expert reply by: Erik B

0

Answer 1

I called Inno, and they confirmed that the Gravity Ski and Snowboard Carrier, part #INA952, will fit on your 1-1/4" x 1-1/4" square crossbars with no problem. They did not have an exact maximum, but they said they it could fit up to 2"…

view full answer...

Answer 2

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, the etrailer hitch part #e98912 that you referenced fits the Wilderness versions of the 2024 Subaru Crosstrek

view full answer...

Answer 9

Yes, it does! The Draw-Tite Hitch item #76209 has been confirmed to fit all models of the 2024 Subaru Crosstrek including the Wilderness. This hitch is custom fit and bolts to your Subaru with included hardware. If your Subaru is not a hybrid, I…

view full answer...

Answer 10

There is indeed a trailer hitch receiver that fits your 2024 Subaru Crosstrek Wilderness, from Curt, with the correct part number being the following: - Curt Trailer Hitch Receiver #C13382 I verified this fit with the manufacturer for you, and it…

view full answer...

Answer 11

Since your 2023 Subaru Crosstrek does not have raised rails you are going to need a whole new roof rack since the Thule Rapid 450R Feet #753-3399-02 are only going to fit vehicles with raised rails. I recommend sticking with the Thule roof rack…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

What Is the Largest Diameter Round or Square Crossbar the Inno Gravity Ski Carrier Will Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching