Hitch Cover Recommendation for 2 inch Draw Tite Hitch

Question

Question:

Are there caps or plugs available that fit the open ended tubes on this hitch?

asked by: Brenda

0

Expert Reply:

Yes Draw Tite has hitch covers for their 2 inch Draw Tite hitches like the part # DT55MR that you referenced with the part # DT7010.

expert reply by: Jameson C

0

Answer 1

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 2

The Draw-Tite Class III Trailer Hitch, item #75547, is the correct hitch for your 2008 Honda CRV. This hitch does not come with the Draw-Tite Hitch cover. The cover with the Draw-Tite Hitch Logo is available as item #DT7010, but does not include a…

view full answer...

Answer 3

The trailer hitch I recommend for your 2016 Volkswagen Tiguan is the etrailer Class III Receiver Hitch #e98906. This trailer hitch has a 2 inch receiver that will be compatible with your hitch accessories. The #e98906 hitch has a gross trailer weight…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 10

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…

view full answer...

Answer 11

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 12

We have the perfect rack for carrying your e-bikes with fenders and step through frames! You will want the Thule Easy Fold XT part #TH903202. This rack will fit your 1-1/4 inch hitch, has frame clamps designed for your style of frame, is specifically…

view full answer...

Hitch Cover Recommendation for 2 inch Draw Tite Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching