How Much Clearance is Needed to Install Solera Slide Topper

Question

Question:

What is the TOTAL length and height of LCV 000163287 including mounting hardware? Because of existing patio awning and entry door can not be more than 88 inches

asked by: Ed L

0

Expert Reply:

All of the our Solera Slide Toppers like the part # LCV000163287 that you referenced require at least 7 inches of clearance between the slide out box and other items on the side of the RV like awning rails or doors. If you have 7 inches of clearance on both sides and the flange width of your slide out is between 80 and 85 inches this would fit and work great.

expert reply by: Jameson C

0

Answer 1

Since your slide out awning is 82-3/4 inches in width the correct slide topper you'd need is the part #LCV000163287.

view full answer...

Answer 2

The Solera RV Slide-Out Awnings will hold up in heavy winds as they have a pre-set tension to reduce billowing and they are made of a much heavier fabric (13.5 oz) which has a five year warranty. Therefore, there should not be too much of a concern…

view full answer...

Answer 3

The reason you are having trouble finding replacement tires for your Forest River Rockwood Geo Pro G19FD is because the ST235/75-15 tires it has is a very uncommon size that only a few trailer tire manufacturers produce. The closest size we have to…

view full answer...

Answer 4

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 5

The newer brackets aren't currently sold separately but I've run into your situation a few times and have just placed the inner bracket on the t-molding instead of on the wall of the slide out. You'll want to get the lower holes in the…

view full answer...

Answer 6

Yes, the Solera RV Slide-Out Awnings like part #LCV000163287 which fits 80" - 85" wide slide-outs (flange to flange) will require that you remove the drip rail. However, the Solera RV Slide-Out Awning will take the place of the drip rail in…

view full answer...

Answer 7

Measuring to pick out the correct slide topper for an RV like your 2018 Forest River Rockwood is pretty easy. You have to measure the box width including the flange on it and you'll be set. So the Solera part #LCV000163288 that you referenced is…

view full answer...

Answer 8

The height setting you'll need to use when installing the Curt A16 head part #C16520 that you referenced is going to be based on what your trailer needs to sit level. The height of the head is adjustable as well as how the pin box attaches to the…

view full answer...

Answer 9

Redarc doesn't make a plug-in wire harness for your 2022 Jeep Wagoneer, but they do make an adapter #331-TPH-017 to connect to a Tekonsha plug-in wire harness like part #TK93VR so that you won't have to splice-in any wires to install your…

view full answer...

Answer 10

The correct slide topper awnings for a Jayco Eagle HT 312BHOK are as follows: Solera RV Slide-Out Awning - 11'1" Wide part #LCV000163295 Solera RV Slide-Out Awning - 7'1" Wide part #LCV000163287

view full answer...

Answer 11

Hey Rose, based on the dimensions and color you mentioned the correct slide topper for your 2024 East to West Alta is the part #LCV000163292.

view full answer...

How Much Clearance is Needed to Install Solera Slide Topper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching