Troubleshooting A Yakima Bike Rack That Won't Slide Into A 2" Receiver Hitch On A GMC Sierra

Question

Question:

We have a used Yakima bike rack that was left in a home we purchased. I believe it is the ROC 4 1999-2001 model. I have a GMC Sierra with a 2 inch receiver. The bike rack tube appears to be the same size and will not slide into the hitch. Is there an adapter to join the two? Sorry...Im not that familiar with hitches or bike racks, so appreciate the help.

asked by: Brian G

0

Expert Reply:

Since the Yakima bike rack you have is that old either the receiver tube is damaged or the receiver hitch on your GMC Sierra isn't truly 2". You can measure the receiver to double check but it's most likely that the rack is damaged in someway which is preventing it from sliding into your receiver.

I recommend replacing the bike rack with a new one like the Yakima BackRoad 4 Bike Rack - 1-1/4" and 2" Hitches - Tilting # YA44FR. It has a weight capacity of 37.5lbs per bike and includes a lock to secure your bikes to the rack. The integrated cable lock extends from the front of the left arm, wraps around your bikes, and secures to a post built into the arm.

expert reply by: Kevin C

0

Answer 1

The Yakima RidgeBack 4 Bike Rack #Y02458 has a SpeedKnob at the bottom that is designed to spin freely when it's locked and have the friction needed to loosen/tighten the bike rack when it's unlocked. It sounds like the opposite is happening…

view full answer...

Answer 2

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 5

Definitely! I recommend going with the etrailer Trailer Hitch Receiver #e38KR for your 2024 Hyundai Tucson. I really like this hitch because of the matte black finish as I've found it does a really good job at hiding any nicks or dings that…

view full answer...

Answer 6

Hey Christopher, thanks so much for the nice words about our site, and we do have a trailer hitch receiver that fits your 2024 Hyundai Tucson N-Line, from Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C94WR…

view full answer...

Answer 7

When we installed the Curt Trailer Hitch Receiver #C94WR on a 2022 Hyundai Tucson we found it to have a hitch height of 17" to the inside top of the receiver. This will put you at 14-1/2" of ground clearance to the bottom of the receiver.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

I recommend installing the Yakima JetStream roof rack on your 2023 Kia Telluride SX X-Pro with the factory raised roof rails. You will need the JetStream Crossbars #Y00426 with the Timberline Towers #Y33TR for this. This roof rack will pair well with…

view full answer...