Draw Tite Front Hitch that Fits 2020 GMC Sierra 1500 with 3.0 liter Diesel

Question

Question:

Is there a front receiver available for 2020 GMC AT4 1/2 ton Sierra with the 3.0L Diesel Engine?

asked by: Sam W

0

Expert Reply:

Yes, we have the Draw Tite hitch part # DT44HR which is a confirmed fit for your 2020 GMC Sierra 1500 with the 3.0 liter diesel engine.

expert reply by: Jameson C

0

Answer 1

The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR is confirmed to fit your 2021 GMC Sierra 1500 with the 3.0L diesel engine. This receiver is rated for a vertical load up to 500lbs and a line pull rating of up to 9,000lbs. This Draw-Tite uses…

view full answer...

Answer 2

So long as your 2020 Chevy Silverado 1500 is a gas version and not a diesel, then the EcoHitch front hitch you asked about does indeed fit, with the correct part number being the following: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH58RR…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Draw Tite Front Hitch that Fits 2020 GMC Sierra 1500 with 3.0 liter Diesel

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching