Length of Shank Curt Hitch Ball CU77fr For Curt SecureLatch

Question

Question:

Could you tell me how long the shank ?

asked by: Bob

0

Expert Reply:

The length of the threaded shank of the Curt ball # CU77FR that you referenced is 3-1/2 inches.

expert reply by: Jameson C

0

Answer 1

The standard six lug bolt pattern for trailer wheels is 6 on 5-1/2 inches. If you have a six lug bolt pattern this would be what you'd have. The pilot diameter wouldn't be an issue either as the 6 lug wheels use a large enough pilot diameter…

view full answer...

Answer 2

For a Dexter 6,000 lb axle the correct bearing kit with grease seal would be the #BK3-110.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

On a 7 pin round which is the common connection on a semi trailer, the clearance/marker lights are at the 10 o clock position when you look at the trailer wiring connection. When looking at the connector on the back of the truck, that will put the…

view full answer...

Answer 9

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by…

view full answer...

Length of Shank Curt Hitch Ball CU77fr For Curt SecureLatch

Product Page this Question was Asked From

Continue Researching