Video that Shows Install of Curt Roof Rack C18118

Question

Question:

I do not see any pictures of these Cross bars on any 2018 Subaru Outbacks. Do you have pictures to show me?

asked by: Joseph A

0

Expert Reply:

We have not had the chance to install the Curt roof rack part # C18118 that fits your 2018 Subaru Outback Wagon on a Subaru like yours yet but since the install of this is pretty universal you can watch the install video link I attached on this page to see how it installs and looks on a similar vehicle.

expert reply by: Jameson C

0

Answer 1

I checked with Yakima and when using the SkyLine towers #Y53TR the bar spread can be as much as 30-1/2 inches on center. In addition to the towers you will also need Landing Pad 15, #Y00241, and bars #Y00425. The length of your item at 78 inches is…

view full answer...

Answer 2

We have replacement hardware for the Thule Adventurer that you have with part #TH04997 that is compatible with the factory crossbars of a 2016 Subaru Outback. Or if your Outback does not have a set of crossbars for the box to attach to we have the…

view full answer...

Answer 3

I attached a picture that shows how the Curt roof rack part #C18118 installs on the raised side rails of your 2021 Subaru Outback Wagon. In the picture you can see that the rack attaches to the portion of the rack that swings out which…

view full answer...

Answer 4

Yes, I do have an option that may fit your 2022 Subaru Outback Premium. I did some research on the Roofnest Sparrow. Your crossbars need to be at least 30" apart. My roof rack recommendation is the Malone AirFlow2 Roof Rack - Aero Crossbars…

view full answer...

Answer 5

Yes, the 58" long Malone AirFlow2 Roof Rack #MPG216 can be used with the older version of the Thule Hullavator part TH897XT on your 2018 Subaru Outback Wagon. You just need to use the T-Track mounting system to do so.

view full answer...

Answer 6

Draw-Tite and Curt are 2 of the leading brands when it comes to towing products so a lot of their hitches look pretty similar since they are in competition with each other. When it comes to the Draw-Tite #76227 and the Curt #C13410 I recommend…

view full answer...

Answer 7

On your 2015 Subaru Outback I suggest the Yakima LoadWarrior #Y07070 if you have at the factory roof rack. I've attached a video for you to take a look at. If you need a roof rack first it will depend on the style of roof you have. If you…

view full answer...

Answer 8

In order to fit multiple items on the roof of a 2015 Subaru Outback such as the Yakima OffGrid Roof Cargo Basket part #Y07138 and Yakima SlimShady Awning part #Y36VR, you will need to replace the factory crossbars with a longer aftermarket set. I…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Video that Shows Install of Curt Roof Rack C18118

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching