Hitch that Fits 2019 Jeep Trailhawk and Comes Through Rear Bumper

Question

Question:

Trying to get a factory style hitch that goes through the rear bumper instead of below it. Will this do that?

asked by: David

1

Helpful Expert Reply:

Yes the Draw Tite hitch part # DT28MR that you referenced does come through the rear bumper of your 2019 Jeep Cherokee instead of underneath it.

expert reply by: Jameson C

1

Bumper Hitch Configuration
(click to enlarge)

Answer 1

The wiring kit to flat tow your 2022 Jeep Cherokee Trailhawk does not include a charge line to the battery, so you would need to get one separately and install that so the battery does not die. If your motorhome does not have a charge line you…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Sorry about the confusion. The Curt #C13398 and #C13171 and the etrailer brand #e73ZR would all fit the 2019 Jeep Cherokee Trailhawk. Of the various options, a top choice would be the etrailer #e73ZR because once installed it would be the most…

view full answer...

Answer 4

I have attached for you below a list of suspension components that will improve the ride, handling, steering, and overall stability of your 2022 Thor Axis 25.6 on Ford E-450 Chassis. If you don't want to do everything at once, I have attached…

view full answer...

Answer 5

We offer adapters so you can use the 2 inch bike rack with the 1 1/4 inch receiver hitch. The appropriate adapter for your hitch depends on what class it is. You can use part #HTAD if your hitch is a Class I or Class II and part #80303 will only fit…

view full answer...

Answer 6

There are two types of trailer hitch options for a 2021 Jeep Cherokee Trailhawk, ones that installs under the bumper like the etrailer Trailer Hitch Receiver part #e73ZR and ones that installs inside the bumper like the Draw-Tite Max-Frame Trailer…

view full answer...

Answer 7

The etrailer Hitch item #e73ZR is an excellent option for a 2020 Jeep Cherokee and what I recommend. It offers a bolt-on fit with no drilling and it has a hidden design.

view full answer...

Answer 8

Yes, I can confirm that the Curt Trailer Hitch item #C13395 does fit the Trailhawk model of your 2020 Jeep Cherokee. This hitch is custom fit and bolts directly to your Jeep with included hardware. If you need a wiring harness to control your trailer…

view full answer...

Answer 9

We have trailer hitches with concealed crosstubes that fit your 2019 Jeep Cherokee like the etrailer part #e73ZR which is a great option, but the hitch tube does hang below the rear bumper of the vehicle. We do not have a hitch like the Mopar part…

view full answer...

Answer 10

Yes, the Curt Trailer Hitch Receiver #C13171 will fit with the Trailhawk model of the 2016 Jeep Cherokee. For a complete towing setup you'll need the wiring #118605 and a tow ball kit like part #EBMK4. I've attached some videos for you to…

view full answer...

Answer 11

The Curt #C56406 will NOT turn off the ParkSense feature of your 2019 Cherokee, but luckily enough, the folks at Jeep had the good sense to make a provision that allows you to turn off that feature temporarily. You can turn on and turn off ParkSense…

view full answer...

Answer 12

Vehicle passenger compartment plastic trim panels, like the dash panel on your Trailhawk that comes off to give you access to the brake controller port, usually have tabs that fit into slots or metal fasteners, in addition to the visible retaining…

view full answer...

Hitch that Fits 2019 Jeep Trailhawk and Comes Through Rear Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching