SideBar Rails For Yakima Overhaul HD Compatible With Yakima Load Stops For Yakima HD Bars

Question

Question:

Will this Yakima Loadstop work with the SideBars for the Overhaul HD system? I know that theyre intended mainly to be used on the top crossbars. But was hoping they work on the sidebars as well.

asked by: Joe H

0

Expert Reply:

I spoke with Yakima and they confirmed that the Load Stops for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars # Y01161 will in fact work with the Sidebars on the Overhaul HD system # Y01153.

expert reply by: Bryce D

0

Answer 1

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Answer 2

The Yakima SideBar Rails cannot be cut as the assembly does in fact involve one bar sliding into the other like you mentioned and it would not be structurally sound, but there is a short bed version of these rails, which is the SideBar Rails for…

view full answer...

Answer 3

For your 2021 Ram 1500 short bed, you will want to use the SideBar Rails for Yakima OverHaul HD and Outpost HD Truck Bed Racks #Y01153 for your Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58.

view full answer...

Answer 4

I recommend something like the Rhino-Rack Batwing Awning #RR33100, which bolts to the driers side of your 2016 Ram 2500. The Rhino Rack Batwing covers 118 square feet, and will mount into the T-slot channels on the HD bars for your Overhaul HD…

view full answer...

Answer 5

Yes. You can mount an awning on Yakima Overhaul HD systems like the #Y01151-5855. If you wanted to use the Yakima Slim Shady Awning #Y36VR, that awning will mount using the included clamps to the HD bars on the Overhaul system. If you're wanting…

view full answer...

Answer 6

We aren't aware of any changes that Yakima made to their Overhaul HD system with the part #Y01151-57 and the adapter that fits it to the Retrax rails part #Y01155 but we are aware that if you go lighter on tightening the knobs of the rack feet…

view full answer...

Answer 7

The 300 lb weight capacity of the Yakima Overhaul HD adapter part #Y01155 is a dynamic weight capacity which means that it would easily have the weight capacity for 460 lbs static like when you'd be camping.

view full answer...

Answer 8

It might be possible to use the Long Bed Yakima SideBar Side Rails #Y01154 for the OverHaul Rack #Y01151-57 on your Ford F-150 Raptor with the short bed but it's going to depend on how much space you have between the uprights when they're…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

SideBar Rails For Yakima Overhaul HD Compatible With Yakima Load Stops For Yakima HD Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching