Recommended Weight Distribution Hitch For 16000lb Deck Over Utility Trailer W/ 10-12 Tall Frame

Question

Question:

I recently purchased a new 16k deck over utility trailer. I am currently towing with a 2018 Ram 2500. The tounge of the trailer has I believe a 10inch or 12inch beam. Is there a weight distribution system that can be use in this case?

asked by: William M

0

Expert Reply:

I have an option for you, but that is a pretty large frame rail at 10" - 12".

The one option that will work is the Blue Ox SwayPro Weight Distribution Hitch # BXW2000 which works with tongue weights between 1500-2000lbs which should be about right of your 16000lb deck over trailer, and to secure it to your frame you will need the Blue Ox Signature Series Lift Brackets for SwayPro Weight Distribution Systems # BXW4021.

This bracket will bolt directly to your frame so the the size will not cause any issues.

This hitch does not include a hitch ball so you will need either 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286 to match the coupler on your trailer.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The overall dimensions of the Blue Ox Signature Series Lift Brackets #BXW4021 are 12" wide x 7-3/4" tall as you can see in the attached photo.

view full answer...

Answer 2

I have a solution for you but the Reese Weight Distribution w/out Shank #RP66021 that you referenced won't work well for you due to how tall your frame is. So what you'll need to do is install an under slung coupler on your trailer like the…

view full answer...

Answer 3

I reached out to my contact at Blue Ox and they checked with their engineer and rotating the assembly of the Blue Ox Signature Series Lift Brackets for SwayPro Weight Distribution Systems #BXW4021 will not work. The chain would not have the proper…

view full answer...

Answer 4

The maximum tongue weight capacity for the Fastway e2 Weight Distribution Bars is 1200 pounds, which is unfortunately not enough to support your 14,000 pound load (with a potential tongue weight between 1400 and 2100 pounds). You will need to get a…

view full answer...

Answer 5

The difference between the two Blue Ox weight distribution systems is the type coupler they are designed to use with on the trailer frame. The #BXW2000 is designed for standard couplers that attach to the top of the trailer frame whereas the part…

view full answer...

Answer 6

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

I recommend installing the Firestone Ride-Rite Air Helper Springs #F2597 on your 2015 Ford F-250 Super Duty. This has a 5,000 lb weight capacity (although it only helps handle the load and won't increase the truck's weight capacity) and is…

view full answer...

Recommended Weight Distribution Hitch For 16000lb Deck Over Utility Trailer W/ 10-12 Tall Frame

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching