Troubleshooting Curt Trailer Wiring for 2021 Toyota RAV4 that Stopped Working

Question

Question:

2021 RAV4 Prime. Used the Curt wiring harness. Followed video instructions exactly. Tested it. It worked perfectly. Hooked up lights, it worked perfectly. Hooked up lights a week later and its not working. Suggestions?

asked by: George F

0

Expert Reply:

If none of the light functions work on the Curt trailer wiring connector part # C56434 that you referenced the first thing I would check is the fuse in the red fuse holder since that controls power to all of the functions.

Next I would check to make sure all of the connections are seated properly in case somehow they came loose.

expert reply by: Jameson C

0

Answer 1

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear…

view full answer...

Answer 2

There is a trailer hitch receiver that fits your 2020 Toyota RAV4 that has a totally hidden crosstube, which is made by EcoHitch: - EcoHitch Hidden Trailer Hitch Receiver #EH97FR Not only does this give you a hitch where absolutely zero of the…

view full answer...

Answer 3

The Draw-Tite #36675 for your 2020 Toyota RAV4 weighs 32-lbs.

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C13416 weighs 39 pounds, and the Draw-Tite Trailer Hitch Receiver #36675 weighs 32 pounds. I recommend the Curt Hitch #C13416 for your vehicle. This hitch is rated for 4,000 pounds which is 500 more pounds than the…

view full answer...

Answer 5

The most hidden trailer hitch we offer for your 2020 Toyota RAV4 is the Draw Tite part #36675 which only has the hitch opening that hangs below the rear bumper and since it's the smaller size of 1-1/4 inch it's the least visible option. Now…

view full answer...

Answer 6

I can confirm that a hitch like the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13416 will fit both the Hybrid and non-Hybrid versions of the 2021 Toyota RAV4 since the frames of the vehicles are the same. If you check out the…

view full answer...

Answer 7

It sounds like the problem could be the converter box of the T-One Vehicle Wiring Harness #118412 if the connections are good and the ground is good. The best way to test the box would be to get a circuit tester like the part #PTW2993 and test the…

view full answer...

Answer 8

A great majority of standard ball mounts are designed so that they can be used in either the drop or rise position. Using a ball mount like the Draw-Tite #2753 that you were looking at in the rise position is just a matter of turning it upside down…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Troubleshooting Curt Trailer Wiring for 2021 Toyota RAV4 that Stopped Working

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching