Can I Mount An Inno Roof Deck Platform Rack On A Yakima BedRock HD Truck Bed Rack

Question

Question:

Looking to see if this deck will fit on a bed low mount Yakima HD bars. Thanks

asked by: Joe

1

Helpful Expert Reply:

Yes, you can attach the Inno Roof Deck Platform Rack for Crossbars - Aluminum - 39-1/2" x 43-1/4" - 165 lbs, part # INA510, to the Yakima BedRock HD Truck Bed Rack - Aluminum - 180 lbs - 68" Crossbars, part # Y01160-58.

The BedRock has a maximum weight of 300 lbs on road or 180 lbs off road. The towers are adjustable so you can tailor your rack to the load. The HD crossbars have tie down points at the end of the crossbars. The HD crossbars also have a t-channel so all channel mounted accessories will work with this rack. The BedRock comes with the Yakima Same Key System lock cores, so you can secure this rack to your truck.

The Inno Roof Deck Platform Rack will clamp to the HD crossbars and it weighs approximately 29 lbs. It can support a maximum crossbar spread of 36" and when paired with this rack it has a minimum bar spread of 24". This rack has integrated C-channels for eye-bolts and heavy duty rail kit. It also comes with locks to secure it to your Yakima BedRock rack.

I have included product description links, a Yakima BedRock installation video, and an Inno Roof Deck Platform demo video below.

expert reply by: Mark Smith

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Can I Mount An Inno Roof Deck Platform Rack On A Yakima BedRock HD Truck Bed Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching