Is MaxxAir TuffMaxx Replacement A/C Cover MA00-325001 Confirmed To Fit Coleman Mach A/C 8633-8766?

Question

Question:

I Have a Coleman Mach Model 8633 -8766 and just want to confirm that the MA00-325001 is a direct replacement before I order. Dimensions appear to be in line Thanks

asked by: John J

0

Expert Reply:

The MaxxAir TuffMaxx Replacement RV Air Conditioner Cover for Coleman-Mach RV Air Conditioners # MA00-325001 you were looking at is indeed confirmed to be a direct replacement for your Coleman Mach Air Conditioner Model 8633-8766.

Since you mentioned that the 41-5/8" long x 29-3/8" wide x 12-3/4" tall match that of your current cover you can be confident that you are getting the correct part.

I included a video of the # MA00-325001 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The correct replacement overhead unit for an Airxcel 8000 Series Air Conditioner which is made by Coleman Mach is the Advent Air Replacement RV Air Conditioner for Coleman Setup w/ Start Capacitor part #ACCOL150. There won't be any issues reusing…

view full answer...

Answer 2

From what I was able to find out, the Coleman 8333-876 AC Unit is a Mach 3 unit, so the MaxxAir TuffMaxx Replacement Shroud for Coleman-Mach RV Air Conditioners - Polar White #MA00-325001 will work perfectly.

view full answer...

Answer 3

Based on your model number the Replacement RV Air Conditioner Cover #MA8335A5261 is the correct shroud for your Coleman 7300 series.

view full answer...

Answer 4

The MaxxAir TuffMaxx Replacement Shroud #MA00-325001 that you referenced will work well on your horse trailer's A/C unit. I spoke with my contact at MaxxAir and Coleman-Mach and confirmed the replacement shroud will fit your unit. Based on my…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

view full answer...

Answer 12

The Carrier Air V RV Air Conditioner is no longer produced so a direct replacement of the same unit is not an option. However, we do have available the two Advent AC models that are designed as replacement units for the Carrier Air V. I recommend…

view full answer...