Replacement Disc Brakes Needed for a 1995 Shorelander SSR27T
Question:
Having trouble trying to find the parts needed to replace my disk brakes on a 1995 Shorelander SSR27T trailer. I need a complete setup for both axels brakes, calipers, rotors, bracket, and bearings/ seals inner outer and bearing buddies. Each axel is rated for 4300 for a total of 8600. I have 15 inch, 6 lug rims. I believe the rotors are 12 inch. Any help would be appreciated. Thanks
asked by: Thomas J
Expert Reply:
To figure out which disc brakes will fit your trailer, you will need to remove one of the hubs. Unfortunately, I was unable to find any information about your specific model Shorelander. With that being said, once the hub is off, there will typically be numbers pressed into the bearings. These do wear off over time, though, so you may need to measure the inside diameter of the inner and outer bearings. This should be done with calipers as it needs to be done as precisely as possible.
The Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs # K2HR526D, as an example, will use an inner bearing # 25580 (1.750" inner diameter), and an outer bearing # 15123 (1.250" inner diameter). This will also fit a standard 5 bolt brake flange, which I included a picture of how and where to measure.
Odds are this will be the correct kit for your trailer, but I do suggest double checking to make sure.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Replacement Brakes do I Need for my Shore Lander Trailer with 10 Drums
- Shop: Demco Hydraulic Drum Brake Assembly - Single Servo - Galvanized - 10" - Left Hand - 3,500 lbs
- Shop: Hydraulic Trailer Brake - Uni-Servo - 10" - Left Hand - 3,500 lbs
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Dexter Hydraulic Trailer Brake - Free Backing - 12" - Right Hand Assembly - 7K
- Shop: Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Left Hand - 3,500 lbs
- Shop: Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Right Hand - 3,500 lbs
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Trailer Wiring
- Search Results: 25580
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: DeeMaxx Disc Brake Kit Review
- Shop: Brake Controller
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: dust cap
- Video: etrailer Stabilizer Jacks Review
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Video: Kodiak E-Z Lube Disc Brakes Installation
- Article: Trailer Tire Sizing
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Search Results: dust caps
on Hand Tools
