What Hardware Is Needed To Install As Drop-In

Question

Question:

How would the sink be attached to the counter top if used as a in?

asked by: Christopher H

0

Expert Reply:

The Better Bath Single Bowl RV Kitchen Sink, # LC421572 can definitely be used as a drop-in mount. It is 25" long x 15" wide with tapered flanges that support the stainless steel sink upgrade being used as a drop in mount, installed using the same type of sink mounting clip hardware as a residential sink. The hardware will need to be sourced locally with specific type used dependent on thickness of your counter-top.

expert reply by: Michael R

0

LC421572_001
(click to enlarge)

Answer 1

The overall dimensions of the Better Bath RV Kitchen Sink part #LC421572 including the lip are 25" long x 15" wide x 7" tall. The lip is 1" so if you wanted the bowl dimensions that would be 23" long x 13" wide x 7"…

view full answer...

Answer 2

The Better Bath Single Bowl RV Kitchen Sink - 25" Long x 15" Wide - Stainless Steel #LC421572 comes with the same mounting hardware you pointed out comes with sink #LC385313. I also recommend using the Loctite RTV 5699 High-Performance…

view full answer...

Answer 3

Yes it will. The Better Bath RV Kitchen Sink, and #LC421572 can be top mounted too.

view full answer...

Answer 4

If you check out the attached dimension picture for the sink part #LC421572 you would be able to pretty easily tell if this would fit your Winnebago or not. If you need different dimensions let me know what you have and I can check to see if we have…

view full answer...

Answer 5

The Better Bath RV Kitchen Sink #LC421572 referenced in your question does not include a strainer basket but its 3-1/2 inch drain opening is compatible with most models on the market, such as the LaSalle Bristol #34439166. We do have a couple sink…

view full answer...

Answer 6

The black tube in the attached picture is meant to be attached to the bottom of the LaSalle Bristol Single Bowl RV Bathroom Sink part #34416156PPA. At that point you can use the flex pipe in your RV to connect directly to the black pipe. The flex…

view full answer...

Answer 7

Sinks like the LaSalle Bristol 14-3/4" x 12-1/4" Rectangular Lavatory Sink - ABS - Parchment #34416186PPA you referenced are not glued in. They are sealed with silicone caulk like #0160297 and secured with the under counter mounting…

view full answer...

Answer 8

Yes, the Better Bath Single Bowl RV Kitchen Sink #LC421572 referenced in your question will fit into a 24 inch x 14 inch opening. Its dimensions excluding the outer flange are 22-7/8 inches long, 12-7/8 inches wide, and 6 inches deep. With the outer…

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 11

First we do have the basic Curved Equalizer #TREQ104 which matches your 5-3/4" length and 2" height. As these are sold individually you will need 2 for your 1998 Fleetwood Terry camper. You might consider upgrading to a cushioned equalizer…

view full answer...

Answer 12

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

view full answer...

What Hardware Is Needed To Install As Drop-In

Product Page this Question was Asked From

Continue Researching