How to Attach Drain Tube to LaSalle Bristol Sink?

Question

Question:

How do I attach the drain buddy-o-pal?

asked by: Robert A

0

Expert Reply:

The black tube in the attached picture is meant to be attached to the bottom of the LaSalle Bristol Single Bowl RV Bathroom Sink part # 34416156PPA. At that point you can use the flex pipe in your RV to connect directly to the black pipe. The flex pipe will slide up and on the pipe then a hose clamp is used to secure it to the pipe.

expert reply by: Randy B

0

Answer 1

When installing the LaSalle Bristol Single Bowl RV Bathroom Sink, #34416156PPA the drain tube to the sink (as well as seal the sink to your counter top) you will want to use a good silicone sealant, something such as TremPro 644 #0160297. This will…

view full answer...

Answer 2

Your best bet would be to replace the sink with Item #34416156PPA . It comes with all new mounting hardware and brackets as we do not offer just the replacement brackets.

view full answer...

Answer 3

According to my contact at LaSalle Bristol, there is no significant difference between the 17" x 20" Oval Lavatory Sink #34416305PWA and the 17" x 20" Oval Lavatory Sink #34416370PWA. It appears the brackets included with…

view full answer...

Answer 4

The foam washer that comes with #34465SPR1303 sits underneath the stainless steel drain flange inside the sink. When you tighten the nut down on the other side it will compress the foam washer creating a seal. This should be enough to keep anything…

view full answer...

Answer 5

I went ahead and checked out your LaSalle Bristol bathroom sink 156 and it appears that the: -LaSalle Bristol Single Bowl RV Bathroom Sink #34416156PPA you mention is the same product. This sink measures 13-3/4" long x 10-3/8" wide x…

view full answer...

Answer 6

Sinks like the LaSalle Bristol 14-3/4" x 12-1/4" Rectangular Lavatory Sink - ABS - Parchment #34416186PPA you referenced are not glued in. They are sealed with silicone caulk like #0160297 and secured with the under counter mounting…

view full answer...

Answer 7

When gluing together Valterra RV sewer pipes like the #T1028 you'd need to use an ABS solvent cement like the part #A05-0303.

view full answer...

Answer 8

The Better Bath Single Bowl RV Kitchen Sink, #LC421572 can definitely be used as a drop-in mount. It is 25" long x 15" wide with tapered flanges that support the stainless steel sink upgrade being used as a drop in mount, installed using…

view full answer...

Answer 9

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

How to Attach Drain Tube to LaSalle Bristol Sink?

Product Page this Question was Asked From

Continue Researching