Differences between the Curt Trailer Hitch # C13651 and # 13650 for a Ford Escape
Question:
Part #C13651 is for Escapes with a factory installed trailer hitch. Part # 13650 is for Escapes without a factory installed trailer hitch. Are both these hitches the same height off the ground? Im not sure I understand the difference between them.
asked by: Harvey C
Helpful Expert Reply:
I spoke with my contact at Curt and he told me that the Curt Trailer Hitch, # C13651, does sit lower to the ground than the Curt Hitch, # 13650. Both trailer hitches will fit the 2005 to 2011 Ford Escape without a factory hitch, but the # C13651 will fit on models that were equipped with a factory 1-1/4 inch hitch.
Once installed, the Curt Trailer Hitch # C13651 will sit approximately 13-1/2 inches from the ground and hitch # 13650 will sit approximately 13-1/4 inches from the ground. The OEM hitch on the Ford Escape sits higher up in the bumper and, while the difference in the Curt hitches is not very much, the additional 1/4 inch drop is needed to clear part of the OEM hitch.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Trailer Hitch Installation - 2009 Ford Escape - Curt C13651
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Trailer Hitch Installation - 2008 Mercury Mariner - Curt
- Search Results: hitch
- Q&A: How to Determine if a 2006 Mercury Mariner Has a Factory Tow Package
- Search Results: 13650
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: What Is The Difference Between The Curt Hitches # 13650 and # C13651
- Shop: Tire Chains
- Shop: Suspension Enhancement
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle
- Q&A: Availability of 2 Inch Hitch to Fit 2009 Ford Escape with Factory Class II Tow Package and Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Wiring Harness that Does Not Require Splicing for a 2016 Chevy Colorado
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2010 Lincoln MKX
- Video: Trailer Wiring Harness Installation - 2008 Mazda Tribute
- Shop: Roof Rack
- Q&A: Difference Between Curt 13650 and 13651 on 2008 Ford Escape
- Q&A: Where is the Draw-Tite Hitch 75751 for a 2011 Ford Escape Made
- Shop: Performance Chip Tuners
- Video: Trailer Hitch Installation - 2006 Ford Escape - Draw-Tite
- Video: Trailer Hitch Installation - 2006 Ford Escape Hybrid
- Video: Konig Premium Self-Tensioning Snow Tire Chains Review TH02230K11
- Shop: Front Mount Hitch