5th Wheel Hitch for 2021 Silverado 2500 Short Bed w OEM Rail Kit Towing Rockwood Signature 8298KS  

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

Yes, you will need to use the Wedge Block #LC79UD for the Lippert Turning Point pin box on your Grand Design 5th wheel RV camper. This is a universal block that will fit into the funnel on the B&W Patriot 5th Wheel Trailer Hitch #BWRVK3255 and…

The correct wedge to use with the B and W hitch #BWRVK3710 that you referenced and your Lippert Turning Point is the part #SWW-06.

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

Yes, Demco does have the 21K Autoslide #DM89GV as well as an 18K Autoslide #DM69GV that will fit the factory prep/puck system in a Ram 2500 or 3500 pickup. If you have one of the following pin boxes you will also need the corresponding accessory to…

Thank you for providing those measurements! Since your 5th wheel hitch height is 47 inches, subtracting the bed height of 39 inches gives us the 8 inches you mentioned which is technically the setting you would need to use on your Demco Hijacker…

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

The Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM8550034 that you referenced fits beneath the tops of the bed rails. If you check out the picture I attached you can see that the head of it does not stick up higher than the tops of the side…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…