Arms to Replace Dometic Power Awning 8952xxx Arms

Question

Question:

Dometic power awning 8952xxx adjustable arm assembly. Can I order just the adjustable arm assembly?

asked by: Jack P

0

Expert Reply:

We do have arms you can use as replacements for your Dometic 8952xxx Power Awning, though just the adjustable arm portion alone is not available. What we do have are the Solera Smart Arm assemblies in either 63 inch or 69 inch lengths. So that means you will need to have either 63 or 69 inches of space straight down from your awning rail for installation.

The Smart Arm assemblies are also available in either Black or White in color:

- 63 Inches: Solera Smart Arm 12V Power RV Awning Conversion Kit - White # LC759404 or Black # LC759516

- 69 Inches: Solera Smart Arm 12V Power RV Awning Conversion Kit - White # LC759405 or Black # LC759517

expert reply by: Kyle S

0

Answer 1

Yes the LED Fabric Light Kit with Switch/Plate for Solera RV Awning #LC674283 does fit the Solera awning you have on your 2020 Forest River Sabre. Thanks for adding the picture as that made it very easy to determine!

view full answer...

Answer 2

I can help you get your awning back in working order but it's going to involved switching out your entire support arms with the Solera Universal kit which comes in Black #LC434727 or White #LC434728 and measures 69" tall (the rail that is…

view full answer...

Answer 3

Good question, and the difference between the standard Solera 12V Power RV Awning Conversion Kit #LC434724 (White) or #LC434723 (Black) and the Solera Smart Arm 12V Power RV Awning Conversion Kit #LC759405 (White) or #LC759517 (Black) is the…

view full answer...

Answer 4

If you happen to have a Lippert Solera awning, which is pretty common, you'd want the LED Fabric Light Kit #LC674283. It measures 21 feet long but can be cut down to size. The kit includes a switch and plate as well.

view full answer...

Answer 5

To convert your 64 inch Dometic awning to a powered awning what you would want is the Solera Smart Arm Electric RV Awning Conversion Kit #LC759404 which was designed to replace Dometic setups like yours and is the correct size.

view full answer...

Answer 6

It really comes down to the available vertical area on the RV where you plan to install the awning if the 63 inch #LC759404 or the 69 inch #LC759405 is a better fit. They both extend out 8 feet so the shorter arms would have a more flat projection if…

view full answer...

Answer 7

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 8

For what you are looking for the best option is the 16 foot long LED Light Strip #DG52683 which can be cut to length and used in various section lengths as well as be reconnected. The strip you referenced once cut doesn't have an easy way to run…

view full answer...

Answer 9

I attached a picture of the wiring diagram for the Solera Smart Arm 12V Power RV Awning Conversion Kit #LC759404 that you referenced.

view full answer...

Answer 10

I would certainly recommend the 1/2-inch wire loom #459075-1. It will hold two jacketed 2 wire 10-gauge wire and three jacketed 2 wire 12-gauge wire. See pictures to the right. In addition, I was able to fit comfortably eleven individual 16-gauge…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...