LED Light Strip that Can Be Cut Down to Shorter Sections

Question

Question:

Can this light strip be used to make 5 3ft sections in separate applications? Meaning, I need to use this in 5 different places. Can I purchase a dongle to attach power or is it only designed for single use? If so, do you offer something in 3ft lengths?

asked by: Wade

0

Expert Reply:

For what you are looking for the best option is the 16 foot long LED Light Strip # DG52683 which can be cut to length and used in various section lengths as well as be reconnected. The strip you referenced once cut doesn't have an easy way to run wires to so it's not ideal.

expert reply by: Jameson C

0

Answer 1

If you happen to have a Lippert Solera awning, which is pretty common, you'd want the LED Fabric Light Kit #LC674283. It measures 21 feet long but can be cut down to size. The kit includes a switch and plate as well.

view full answer...

Answer 2

We do have arms you can use as replacements for your Dometic 8952xxx Power Awning, though just the adjustable arm portion alone is not available. What we do have are the Solera Smart Arm assemblies in either 63 inch or 69 inch lengths. So that means…

view full answer...

Answer 3

Yes the LED Fabric Light Kit with Switch/Plate for Solera RV Awning #LC674283 does fit the Solera awning you have on your 2020 Forest River Sabre. Thanks for adding the picture as that made it very easy to determine!

view full answer...

Answer 4

I attached a picture of the wiring diagram for the Solera Smart Arm 12V Power RV Awning Conversion Kit #LC759404 that you referenced.

view full answer...

Answer 5

To convert your 64 inch Dometic awning to a powered awning what you would want is the Solera Smart Arm Electric RV Awning Conversion Kit #LC759404 which was designed to replace Dometic setups like yours and is the correct size.

view full answer...

Answer 6

I would certainly recommend the 1/2-inch wire loom #459075-1. It will hold two jacketed 2 wire 10-gauge wire and three jacketed 2 wire 12-gauge wire. See pictures to the right. In addition, I was able to fit comfortably eleven individual 16-gauge…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

LED Light Strip that Can Be Cut Down to Shorter Sections

Featured Help Information

Miscellaneous Media

Continue Researching