Replacement Shroud for Coleman Model 7333A887 RV Air Conditioner

Question

Question:

AC replacement shroud for Coleman model # 7333A887

asked by: Tim

0

Expert Reply:

We do have a replacement shroud for the Coleman Mach air conditioners. The correct replacement is part # MA8335A5261.

If you click the provided link, you can see a product description video featuring the # MA8335A5261 replacement shroud.

expert reply by: Mike L

0

Answer 1

Basically the MaxxAir Replacement Shroud for Coleman-Mach #MA8335A5261 and the MaxxAir TuffMaxx #MA00-325001 fit the same Coleman Mach AC units but are two different styles of cover. I like the two piece part #MA8335A5261 better as it will be a bit…

view full answer...

Answer 2

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the replacement I recommend for you and it has a simple installation. It will fit your Coleman AC unit.

view full answer...

Answer 3

The the MaxxAir shroud part #MA00-325001 is a fit for the Coleman Mach, Mach 1, Mach 3 and Mach 15 models and mounts like the original and includes mounting hardware and instructions. Mach is an entire model line of Coleman air conditioners and…

view full answer...

Answer 4

For the RVP/Coleman AC Units like your 7000 the correct shroud is the part #MA8335A5261. I attached a Review video for this for you to check out as well.

view full answer...

Answer 5

Based on my research it looks like you have an older Coleman Mach AC unit that precedes the Mach 1, Mach 3, etc models. The current version of your particular AC is the Coleman Mach 3. With this in mind the MaxxAir TuffMaxx Replacement Shroud…

view full answer...

Answer 6

I spoke with Airxcel who now owns Coleman-Mach and they informed me that the correct replacement shroud for your Coleman-Mach Air Conditioner is the MaxxAir Replacement Shroud for Coleman-Mach part #MA8335A5261.

view full answer...

Answer 7

I was able to determine from some research that your Coleman 7333C8876 can be interchanged with a Coleman Mach 3, so you'll want the MaxxAir TuffMaxx Replacement Shroud - White #MA00-325001 to replace the shroud on your unit. I've…

view full answer...

Answer 8

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Shroud for Coleman Model 7333A887 RV Air Conditioner

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching