Replacement AC Shroud for Coleman 7333C8876

Question

Question:

Need 2 shrouds for a Coleman 7333C8864. Off a 1997 American Tradition... Thanks

asked by: Frank

0

Expert Reply:

I was able to determine from some research that your Coleman 7333C8876 can be interchanged with a Coleman Mach 3, so you'll want the MaxxAir TuffMaxx Replacement Shroud - White # MA00-325001 to replace the shroud on your unit. I've linked a diagram that shows the dimensions so that you can confirm this will work.

expert reply by: Erik B

0

click to enlarge

Answer 1

Based on the research I've done, it sounds like you 1986 Winnebago LaSharo has an older Coleman Mach 3 series AC unit. So the correct replacement shroud is the MaxxAir TuffMaxx Replacement Shroud for Coleman-Mach RV Air Conditioners #MA00-325001.…

view full answer...

Answer 2

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the replacement I recommend for you and it has a simple installation. It will fit your Coleman AC unit.

view full answer...

Answer 3

I was unable to find any reference to the numbers you listed, but based on the dimensions you gave my best guess is you need the MaxxAir Replacement Shroud for Coleman-Mach / RVP Brand RV Air Conditioners #MA8335A5261. This is for older Coleman-Mach…

view full answer...

Answer 4

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 5

We do have a replacement shroud for the Coleman Mach air conditioners. The correct replacement is part #MA8335A5261. If you click the provided link, you can see a product description video featuring the #MA8335A5261 replacement shroud.

view full answer...

Answer 6

The correct replacement for an Atwood RV Water Heater GC10A-3E is the Atwood RV Water Heater part #AT94022 or GC10-4E. This water heater measures 16" tall x 15-1/2" wide x 20-7/8" deep which should be an exact match for what you have…

view full answer...

Answer 7

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 12

Can you email me the pictures? Its going to be one of the following two though. Either part #MA00-325001 or #MA8335A5261. Whichever looks like what you have would be correct.

view full answer...

Replacement AC Shroud for Coleman 7333C8876

Product Page this Question was Asked From

Continue Researching