Trailer Fender Replacement for Harbor Freight Folding Trailer

Question

Question:

I have a Harbor Freight fold up trailer with 12 inch tires...what is the best fender to use?

asked by: Gary K

0

Expert Reply:

I looked up pictures of your trailer and the most similar option we carry to the fender it has on it would be the # HP99VR which is the Jeep style of fender.

expert reply by: Jameson C

0

Answer 1

You have 12 inch rims, but extra 3/4 of an inch you measured is for the lip of the tire that does not count towards the overall diameter. The black fenders part #F008559 should work well for you, but to utilize your current mounting setup you would…

view full answer...

Answer 2

I recommend the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles, #8-258BTUC1 with a 5 on 4-1/2 bolt pattern and wheel size of 13" to 15".

view full answer...

Answer 3

The Hopkins Agility Trailer Brake Controller #HM47294 will install in your 2017 Ford F-150 by using the Plug-In Adapter #HM47845. The adapter will plug into the connector which is installed behind a side panel between your steering wheel and your…

view full answer...

Answer 4

We carry lots of trailer fenders. I have included a link to them for you. Personally I think the best place to get anything is right here at etrailer. Of course I am a little biased. If you can tell me the wheel size that you have I will be happy…

view full answer...

Answer 5

I have attached the dimensional drawings of the Timbren Heavy-Duty Axle-Less Trailer Suspension part #ASR35HDS02 for you. This system has a weight capacity of 3,500 lbs and is designed for single and dual axle trailers. It has a 5 bolt brake…

view full answer...

Answer 6

Timbren does make a 3,500 lb version of their axle less systems that has a 4 inch lift built into it. For that you'd want the part #ASR35HDS02. This is basically exactly what you listed wanting so this would be a great solution for you.

view full answer...

Answer 7

The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs Item #ASR35HDS02 is compatible with the Dexter Trailer Idler Hub for 5,200-lb Axles - 6 on 5-1/2" Item #008-213-9B.

view full answer...

Answer 8

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

view full answer...

Answer 9

The standard replacement drive-in wheel stud for a 3,500 lb hub/drum like what you have on your Lippert 3,500 axle is the part #7-122 which is the correct thread size and length.

view full answer...

Answer 10

While you've already pulled the hubs and got your bearing numbers, that is not a common bearing size unless you meant L44649. I recommend using a digital caliper like part #PTW80157 and measure the axle spindle where the bearings ride and then…

view full answer...

Answer 11

The correct fenders for a Demco Tow It 2 are: Passenger Replacement Fender #DM66MV Driver Replacement Fender #DM76MV

view full answer...

Answer 12

The website for Taiwanese trailer maker Long Chih Industrial does not provide any specs or construction details for their LCI-850T folding utility trailer so I cannot tell you which parts you will need to complete assembly. However, we do offer all…

view full answer...

Trailer Fender Replacement for Harbor Freight Folding Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching