What are Dimensions of Westin Fey Bumper # 73000

Question

Question:

Looking at this bumper but can’t find dimensions. Can you help? Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel Item # 73000

asked by: Nathan

0

Expert Reply:

The overall length of the Westin Fey Bumper part # 73000 that you referenced is 64-34 inches and is 10 inches tall.

expert reply by: Jameson C

0

Answer 1

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

To install a brake controller like the #5504 that you referenced you only need to connect it to 4 wires. If you find more wires on your vehicle than would be needed to install the controller you wouldn't need to do anything with them. I…

view full answer...

Answer 4

The TorkLift Custom Frame-Mounted Camper Tie Downs #TLC2204 and #TLC3206 that you referenced are designed to fit the 2003 Chevy Silverado 2500 with the 8 foot bed (without a board/step under the bed and without a trailer hitch). If you have the…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 6

Westin does make a custom installation kit that will fit your 1987 Dodge Dakota. However, this mounting kit is only designed to install the Westin Fey Diamondstep Rear Bumpers, which are full replacement bumpers for older model vans and pickups,…

view full answer...

Answer 7

Both the #ETBC7 and the Curt #C57186 are universal 7-way kits, but I recommend the #ETBC7 over the #C57186 for ease of install and because it comes with a wire tester included. Both kits require a 4-way being installed on the vehicle to plug in the…

view full answer...

Answer 8

I am including a link to a FAQ page on trailer wiring. It will show the 7-Way trailer connector functions and the 7-Way vehicle connector functions. At the bottom of the page is a chart that will list the wire colors by vehicle manufacturer. This…

view full answer...

Answer 9

For your 2011 Ford E-250 we have the Westin Fey Diamondstep Rear Bumper which is offered in black part #20107, silver part #20105, and chrome part #21105. These options are all custom fit and they come with all the brackets and hardware needed to…

view full answer...

Answer 10

I have a solution for you. Unfortunately, the Westin Fey Diamondstep #73000 will not fit your 1977 Ford F-250. However, for the correct bumper and mounting hardware, you need the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit…

view full answer...

Answer 11

The length of the Westin Fey Diamondstep Rear Bumper #71000 is 61-1/2" and the depth is right around 7". I confirmed this with my contact at Westin.

view full answer...

Answer 12

The Westin Fey #20009 is 72-3/4" long x 8" tall x 8" deep/wide.

view full answer...

What are Dimensions of Westin Fey Bumper # 73000

Product Page this Question was Asked From

Continue Researching