Length and Width Dimensions of Westin Fey Diamondstep Rear Bumper # 71000

Question

Question:

Good evening, I need to know the dimensions of the bumper length width the dimensions sheet would be great. Randal the plumber Thank you

asked by: Randal W

0

Expert Reply:

The length of the Westin Fey Diamondstep Rear Bumper # 71000 is 61-1/2" and the depth is right around 7". I confirmed this with my contact at Westin.

expert reply by: Jon G

0

Umesh

4/6/2024

Hello jon. On the bumper#71000 on the inside where it mounts what is the distance? Thanks.

Reply

Jon G.

4/6/2024

@Umesh Thanks for reaching out again! The Westin Fey Diamondstep Rear Bumper # 71000 will not fit your 1977 Chevy C20. For this same style that comes with the correct brackets for your vehicle you need the kit # 21000-92230 instead. We don't have the specs readily available for all of these rear bumpers so if the 36-1/4" bracket width of the Westin Fey Surestep Rear Bumper # 20022 you initially asked about doesn't work, please let me know what dimension you're needing and I can reach out to my contact at Westin to see if they have record of something that will match.

Reply

Answer 1

The overall length of the Westin bumper part #21000-92230 that you referenced is 74-1/4 inches.

view full answer...

Answer 2

My Westin representative tells me that their Fey Diamondstep Bumper you referenced, part #21000-92230 is constructed of 12 gauge chrome plated steel. The bumper includes mounting brackets and hardware that are compatible with the 1973-1991 Chevy C/K…

view full answer...

Answer 3

I was able to find the exact replacement amber (1A-S-20A) and red (1A-S-20R) lenses. I did a Google search on kaper2 (or Kaper II), and found replacement lenses. Their replacement lenses are shown as measuring 4 inches long, by 2 inches wide by 3/4…

view full answer...

Answer 4

I do have an option for you but we don't carry any braking assemblies that are 10" diameter x 1-3/4" wide. These are an oddball size and would be best replaced with something more modern so you can access replacement parts if needed.…

view full answer...

Answer 5

In order to charge your batteries wired in parallel with the NoCo Genius #329-GENIUS5 you'll want to connect the positive charge line to the positive terminal of the first battery and the negative line to the negative terminal of the opposite…

view full answer...

Answer 6

The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…

view full answer...

Answer 7

Yes, you can use the NOCO GEN On-Board Battery Charger #NOC34FR on your pickup's parallel batteries without disconnecting them. If your batteries were in a series, they would have to be disconnected. Since your batteries are parallel and maintain…

view full answer...

Answer 8

Hey there Jason; for your 1977 Ford F-100 we do have a diamond step chrome rear bumper that fits, so long as you have the standard bed. What you need is the following: - Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel #21000-92230 This…

view full answer...

Answer 9

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Length and Width Dimensions of Westin Fey Diamondstep Rear Bumper # 71000

Product Page this Question was Asked From

Continue Researching