Solution for Needing Replacement Brake Pads for Al KO 4400 lb Axles

Question

Question:

Looking for break pads 4400 lbs axle , manual adjustment . For 2013 keystone cougar 27RLSWE Thank you

asked by: Dave

0

Expert Reply:

The Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 you were looking at are the correct replacement brake assemblies for your 2013 Keystone Cougar 5th wheel with 4400lb AL-KO Axles.

There isn't a way to get just the brake pads of the Al Ko axles currently.

expert reply by: Jameson C

0

Answer 1

Yes, the Dexter Nev-R-Adjust brake assemblies #23-468-469 and the Dexter Hubs part #84546UC3-EZ wil fit on your current Rockwell axle. Rockwell was bought out by Axletek which is why we know their axles are compatible with Dexter hubs. When wiring up…

view full answer...

Answer 2

I'd need to know the capacity of the axle(s) on your trailer as well as the diameter of the drums. Most likely you have 10 inch brake assemblies and would want the part #23-468-469 for a pair of left and right assemblies that are self-adjusting.…

view full answer...

Answer 3

We can help you with finding what you need to replace the trailer suspension on your 71 Aristocrat. Many times there is a plate or sticker on the axle somewhere or on the trailer that has the weight capacity and size of axle you need. That would be…

view full answer...

Answer 4

I have a replacement axle option for you, but based on the information I was able to find on your AL-KO 4400lb Axle #402268 it uses an older style of braking assembly that was discontinued when AL-KO was bought out by Dexter. If the brakes on your…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 10

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 11

There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Solution for Needing Replacement Brake Pads for Al KO 4400 lb Axles

Product Page this Question was Asked From

Continue Researching