Recommended Trailer Coupler Locks That Can Be Keyed Alike

Question

Question:

Is it possible to get 4 of these that are keyed alike. Just wanting one key for my trailers.

asked by: Chris L

0

Expert Reply:

I have another option for you, but the Bulldog Adjustable Coupler Lock # BD580410 you were looking at can not be ordered keyed alike.

Instead I recommend going with the etrailer Surge Brake Coupler Lock - 3-3/8" Span - 1/4" Diameter - Chrome # e98888 which will work with nearly all of the trailer couplers available, and can be keyed alike so you do not have to worry about keeping track of 4 different keys.

You will just need to order all 4 at one time, and select the keyed alike option from the drop down menu.

I included a video of the # e98888 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Yes, the B&W Companion OEM 5th Wheel Trailer Hitch item #BWRVK3670 will fit in the puck system of your short bed 2024 Ram 2500. The Companion Slider has a 20,000 lbs capacity and will give you 12" of travel for making tight turns…

view full answer...

Answer 2

Congratulations on the new truck! For your 2020 Chevy Silverado 3500 that's equipped with the factory rail kit, I highly recommend the Curt A30 5th Wheel Trailer Hitch #C16070. This is an excellent, high-capacity hitch that's designed to drop…

view full answer...

Answer 3

The etrailer.com Coupler Lock #e98888 will work perfectly with the Titan Leverlock Coupler #T4845000 to help protect your trailer while it's in storage. This heavy-duty pin simply takes the place of the existing pin on the coupler to either…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...