Recommended Hitch For 2021 Heartland North Trail Travel Trailer to Carry Cargo Carrier

Question

Question:

Looking for a receiver hitch I can mount on the rear of a north trail travel trailer. I would prefer to attach it the the frame instead of the thin wall bumper. I then want to add a hitch style cargo carrier.

asked by: Jeff

0

Expert Reply:

I have a solution for you, but you will need to measure the distance between the side frame stanchions on your trailer. Assuming that your trailer frame is between 22" and 72" wide, the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 is likely going to be the best fit since it fits on box frame, I-beam and C channel frames. This hitch can be welded on or bolted directly to the frame and it has a 350-lbs tongue weight capacity, so it's going to be perfect for a cargo carrier.

For the cargo carrier, I recommend using the 17x50 Swagman Expanse Cargo Carrier # S68FR since it's constructed of steel and will be able to handle the rigors of being carried on a travel trailer. This carrier does weigh about 38.4-lbs, so you'll be limited to around 312-lbs of cargo in the basket without going over the tongue weight capacity. I also recommend adding a locking hitch pin like the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span # 63232 to secure the carrier to the trailer receiver.

I've linked some review and installation videos of these parts for you to check out as well. If you find that you've got a bit wider frame than 72", just let me know and I can help you locate another solution.

expert reply by: Erik B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

2 inch or 2-5/16 inch diameter balls are pretty standard sized balls, it is not surprising that the coupler on the 1997 Coleman camper accepts either one of those sizes. For a 2 inch ball I would recommend a Hitch Ball with 2 inch Diameter and Medium…

view full answer...

Answer 3

The frame brackets are available as a replacement part for the Curt TruTrack Weight Distribution System #C17500, but just the "L" portion of the bracket is not sold individually, so to replace that portion you would need the frame bracket…

view full answer...

Answer 4

It sounds like you're looking for a second set of frame brackets to make it easier to set up your Curt TruTrack, part #C17500, to a second trailer. That's a pretty good idea if you ask me. And pretty easy with part #C17508.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Hitch For 2021 Heartland North Trail Travel Trailer to Carry Cargo Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching