Choosing Correct Bearing Buddy Size for 2001 Coleman Taos Tent Camper
Question:
I have a 2001 Coleman Taos tent camper that I would like to install bearing buddies on. The diameter, as close as I can see, is just shy of 2. I do not have access to a caliper measuring device. Any idea what size I would need? Thanks
asked by: Johanna
Expert Reply:
The particular bearing buddy you reviewed, part # BB1781, fits a hub bore of 1.781 inches and an outer bearing number # LM11949.
Trailer and camper manufacturers may use different components in their products from one production run to another, so the only sure way to know what bearings are used in your Coleman Taos camper is to pull the wheel and hub and check the outer bearing number. Please refer to the photo provided.
The next best method is to measure the hub bore using a digital caliper. Many auto parts stores will loan or rent such tools.
I have included a link to our department page for bearing protectors where you can see the various sizes available. You will notice that we have three different sizes that are just under 2 inches: 1.938 inches, 1.968 inches and 1.98 inches.
Once you have either measured the hub bore with a caliper or confirmed the outer bearing number on your camper you can select the appropriate size bearing buddy and choose either a chrome-plated or stainless steel version.
Products Referenced in This Question
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1781 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.781 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Tire Recommendation for a Coleman Taos Pop Up with 13 inch Wheels
- Shop: Bearing Buddy Bearing Protectors - Model 2717 - Chrome Plated (Pair)
- Search Results: 5 x 4.5
- Q&A: Recommended 5.30-12 Tires for 1997 Coleman Pop-Up Camper
- Q&A: Determining the Appropriate Bearing Buddy Size Using Bearing Part Numbers and Existing Measurements
- Search Results: 12 inch tire cover
- Q&A: Hub Recommendation with Bolt Pattern 5 on 4-1/2 inch and Fits Spindle with Diameter 1-1/6 inch
- Shop: Bearing Buddy Bearing Protectors - Model 1781 - Chrome Plated (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Do Bearing Buddies Work Well on Travel Trailer Hubs
- Q&A: Parts Needed to Flip Axle on a Pop up Camper
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: CE Smith Post-Style Guide-Ons with LED Lights for Boat Trailers - 40" Tall - 1 Pair
- Shop: Front Mount Hitch
- Search Results: bearing buddy
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Search Results: lug nuts
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: lug nut
- Article: Trailer Wiring Diagrams
- Search Results: trailer jack
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: 7 Common Questions Everyone Has About Trailer Tires