Compatibility of a Kuat NV 2 with a Winnebago Solis Dodge Ram Promaster 3500 Van

Question

Question:

Hello- I understand why a Kuat NV 2 cant be used on a motor home. I did read that it can be used on a Mercedes Sprinter Built out van. So…. Can it be used on a built out Ram Promaster 3500? Thanks

asked by: Elizabeth B

0

Expert Reply:

Yes, the Kuat NV 2 # NV22G will be able to accommodate the torque that is exerted on the back of your Winnebago Solis Dodge Ram Promaster 3500 van.

expert reply by: Bob C

0

Answer 1

Most bike racks are not recommended for RVs because they are designed to ride behind a personal vehicle like a sedan, truck, SUV, etc. and not an RV. The pressures and strains exerted on the racks are greater behind RVs because there is more…

view full answer...

Answer 2

Since the doors above the hitch are a decent distance away from each other the Hollywood Rack Bike Rack part #HLY84FR would allow it to open if the rack was folded down, but if the rack was loaded I can't see there being enough clearance. I…

view full answer...

Answer 3

The best hitch electric bike carrier for use on a motorhome is the Hollywood Racks Sport Rider SE Electric Bike Platform Rack #HLY84FR. There are other carriers that can handle the higher weight of electrics but few are rated for use in a motorhome…

view full answer...

Answer 4

I have a great solution for you. I did some research on the Honda 3000iS generator, and I confirmed that the weight is 144 pounds and has dimensions of 25.8 inches x 18.9 inches x 22.4 inches. Unfortunately, they do not manufacture hitch cargo…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 9

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 10

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 11

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Compatibility of a Kuat NV 2 with a Winnebago Solis Dodge Ram Promaster 3500 Van

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching