Which Firestone Ride Rite Air Bag Kit Fits 2020 GMC Sierra 1500

Question

Question:

will the Firestone airbag suspension work on my 2020 gmc 1500 4x4

asked by: Darrel H

1

Helpful Expert Reply:

For your 2020 GMC Sierra 1500 4WD we have the Firestone Ride Rite kit part# F2609 as a confirmed fit but the # F2071 you referenced will not fit as it's for a different truck.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

1

Answer 1

Other than saying that the air bags need to be kept between 5 and 100 psi, Firestone does not offer much in the way of specifics. The instructions mention that as a general rule of thumb, 1 psi will support approximately 40 lbs of load. Your best bet…

view full answer...

Answer 2

Basically, a weight distribution system moves some of the load up the vehicle frame so that the front suspensions bears some of the weight. Weight distribution spreads some of the weight from the rear axle to the front. An air bag system spreads the…

view full answer...

Answer 3

Most trucks will sit a bit higher in the rear than in the front due to the heavier duty suspension that the rear of the truck has. With 5 psi in the bags your truck shouldn't be that much higher (if at all) in the rear than it was before you…

view full answer...

Answer 4

I would be happy to help! The FSN-21-9015 number you provided is actually the part number to the sticker on your Firestone Ride-Rite Helper Springs, and not the model number of the helper spring kit itself. Since you have a 2014 Ford E-450 there is…

view full answer...

Answer 5

With Firestone Ride Rite kits like the part #F2071 the absolute minimum psi you will need to run is 5 psi. This prevents the bags from getting damaged. Typically people run the amount of pressure that allows the vehicle to sit as level as possible…

view full answer...

Answer 6

No, the minimum air pressure is 5 psi and the maximum is 100 psi. The 40 figure comes into play based off of the instructions which state that generally the system can support 40 pounds per 1 psi of air pressure. I have linked the installation…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...