Replacement Entry Step Motor For a 2006 Holiday Rambler Neptune

Question

Question:

Our steps dont always go in or out. Sometimes does not go out at all or go in. If stuck out, tap on motor and they go in but only about 1/2 way. The moon gear is in good shape. Im thinking motor. Its been making weird noises lately. Is there a rebuild kit for it. It looks like a simple window motor.

asked by: Emory H

0

Expert Reply:

It does sound like your step motor is in need of replacement on your 2006 Holiday Rambler Neptune.

The Replacement Motor for Lippert Electric Coach Step # LC301695 would be what you need.

expert reply by: Bud M

0

Answer 1

I sent all of the pictures you sent me to the current manufacturer of the Coach steps (Lippert) and they told me that the correct module you need is the part #LC301702. Your wire colors might not totally match but the purple wire of the new module…

view full answer...

Answer 2

The correct replacement controller for the Lippert Coach Steps is the Replacement Control Module for Lippert Electric Coach Step part #LC301702.

view full answer...

Answer 3

I spoke with my contact at Lippert regarding your existing motor/gearbox model 5973820. He stated that the correct replacement motor is the Lippert Components Kwikee Step Motor Replacement Kit #LC379608. This is a direct replacement for the motor…

view full answer...

Answer 4

The Replacement Control Module for Lippert Electric Coach Step #LC301702 is the correct fit for your Lippert Coach step. The long green wire with the ring terminal is your ground and will be attached bare metal to metal on our coach frame. The…

view full answer...

Answer 5

I did some research on your 2016 Hyundai Sonata and the only way it can be towed behind an motorhome is with a tow dolly like the Roadmaster #RM-2050-1 so there isn't a base plate kit made for the vehicle. The advantage to a tow dolly is…

view full answer...

Answer 6

For the 5973820 Lippert has confirmed to us that the correct replacement is the Lippert Components Kwikee Step Motor Replacement Kit #LC379608.

view full answer...

Answer 7

Yes, the Lippert Kwikee 32 Series Electric Step part #LC372261 comes with the motor, linkage, control board, switch and everything else you need to use them. The mounting plate is 25-1/4" wide x 11-3/8" deep which you will need to…

view full answer...

Answer 8

Most likely the motor is bad. For a replacement motor you would want the part #LC301695. You might make sure that the step isn't damaged mechanically too. If the linkage or steps are bent in such a way that the steps can't move that would…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...