Foot Kit Recommendation For Old Thule Tracker Style Square Crossbars For 2020 Toyota RAV4 Flush Rail

Question

Question:

I have an older set of thule roof racks more than ten years old - in perfect condition. The racks are square cross-bars - and I have bicycle, ski and snowboard carriers for them. I am looking to see if there are feet that would allow me to adapt this system to my 2020 RAV4 hybrid xle with false rails. Any help would, of course, be greatly appreciated.

asked by: Avnish

0

Expert Reply:

I recommend the Inno Feet for Square Crossbars # INXP and Custom Fit Kit # IN33FR for your 2020 Toyota RAV4 with the flush rails. These will allow you to mount your older Thule square cross-bars and use all your current carriers. The Inno feet allow for a weight capacity of up to 165lbs.

Currently Thule does not make feet to use with their old Tracker feet that were used to hold your bars are no longer available.

I have linked a copy of the installation instructions below for the custom fit kit.

expert reply by: Bud M

0

Answer 1

Yes, that is exactly what you'll need to do. The Inno roof rack square bar system that fits your daughter's 2007 Honda CR-V uses the following parts: 46" Inno Square Bars - #INB117 Inno Feet - #INXP Fit Kit - #INTR121 As long as your…

view full answer...

Answer 2

Inno crossbars are 7/8 inch tall and 1-1/4 inch wide so the dimensions you referenced would not work with the Inno feet part #INB127. Only option I have for your 2008 Mazda CX-9 that uses the foot kit part #INB127 is with the other part numbers #INXP…

view full answer...

Answer 3

The Thule feet for square crossbars part #INXP are a direct fit for the tracks of camper shells like what is commonly found on ARE or Leer campers shells. Or you could use 42 inch long tracks like the part #THTP42.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 11

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 12

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Foot Kit Recommendation For Old Thule Tracker Style Square Crossbars For 2020 Toyota RAV4 Flush Rail

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching