Does Demco Replacement Cylinder Cable # DM56VR Fit Demco Cylinder part # DM6215

Question

Question:

Will this fit a Model Number 6215 cylinder???

asked by: James B

0

Expert Reply:

The Demco cylinder part # DM6215 is for the Stay-in-Play system part # SM99251 which is what the # DM56VR you asked about is designed to fit. So the short answer to your question is "yes."

expert reply by: Jameson C

0

Answer 1

In regards to the Roadmaster Battery Charge Line Kit for Towed Vehicles part #RM-156-25, the included circuit breaker does not need to be mounted to a metal surface. The installation instructions are as follows, "Find a suitable mounting…

view full answer...

Answer 2

Yes, the Replacement Cylinder Cable #DM56VR for the Duo Actuating Cylinder #DM6215 will fit on your Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251.

view full answer...

Answer 3

If the cable of your SMI Air Force One kit broke from the cylinder then the only solution is going to be to replace it with the part #DM56VR.

view full answer...

Answer 4

The picture is somewhat hard to understand what's going on, but it looks like they mounted the module of the SMI Air Force One Supplemental Braking System #SM99243 horizontally in front of the radiator. It would appear it wouldn't affect the…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

The stoplight switch #RM-751490 and the monitor light that's included in the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 do the same job, so you wouldn't need it if you decided to go with the Stay-IN-Play DUO. The…

view full answer...

Answer 8

There have not been any major changes to the Stay-In-Play system since 2016, so I believe it certainly would be worthwhile (and a $$$ saver) to remove the major parts from the now-wrecked car. Provided you can get that done for a reasonable cost.…

view full answer...

Answer 9

Correct, you do need a working battery for activation and continual operation of the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 and Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR. If you…

view full answer...

Answer 10

The Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional #SM99251 is going to be connected to your vehicle's battery to be powered which will drain your vehicle's battery. To keep the battery charged while towing you can…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Does Demco Replacement Cylinder Cable # DM56VR Fit Demco Cylinder part # DM6215

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching