Battery Disconnect Switch for 2011 Thor 4 Winds

Question

Question:

Battery disconnect switch for Thor 4 Winds 2011?

asked by: Julian J

0

Expert Reply:

The Seaflo Battery Disconnect part # SE73FR would work great as a battery disconnect for your 2011 Thor 4Winds. It's rated for up to 1,250 amps, is easy to install and use. I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Thanks for the photo, and since your Ford has TorkLift frame-mounted tie-downs that measure 41 inches to the bed, the turnbuckles you will need are going to be from TorkLift. The reason for that is there are no HappiJac turnbuckles that that amount…

view full answer...

Answer 2

Yes, the Happijac Qwik-Load turnbuckles are very similar to the Torklift Turnbuckles like the #TLS9529-2-LK so they would work fine.

view full answer...

Answer 3

The TorkLift options for your truck are the #TLC2220 for the front and #TLC3215 as long as your steps do not run under the bed. If they end at the cab, then these will work. If they do run under the bed, then instead you will want the HappiJac…

view full answer...

Answer 4

I believe we have something for your 2022 Ram 2500 Tradesman Crew Cab, take a look at the: -HappiJac Truck-Mounted Camper Tie-Downs #LC236326-205221. These tie downs will fit onto 2022 Ram 2500 trucks with the 6-1/2' and 8' bed…

view full answer...

Answer 5

Since your battery terminals are exposed in your 2015 Keystone Raptor 5W Toy Hauler what you can do is mount it to the side wall like in the attached picture of this battery converter. You'll want to connect the Seaflo Battery Disconnect…

view full answer...

Answer 6

Yes all of the contacts of the Seaflo Battery Disconnect Switch with Key #SE73FR that you referenced are copper.

view full answer...

Answer 7

The HappiJac Truck-Mounted Camper Tie-Downs #LC236326-205221 will be the correct tie-downs for your 2018 Ram 2500. I would also recommend the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 #LC182895. These turnbuckles…

view full answer...

Answer 8

For your 2001 GMC Sierra 1500 with a 6.5' bed and factory hitch we have a few options. You could use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLC2205 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLC3205 as…

view full answer...

Answer 9

For a frame mounted camper tie down setup that fits your 2021 Ram 1500 Limited with power running boards, a factory hitch we have the frame mounted HappiJac frame mounted tie downs part #LC236326-205221 which are a confirmed fit. Then for a set of…

view full answer...

Answer 10

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Battery Disconnect Switch for 2011 Thor 4 Winds

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching