Are Lippert Cameras Compatible with Furrion Monitors

Question

Question:

lippert cameras compatible with furrion monitors

asked by: Kevin

0

Expert Reply:

The only cameras the Furrion Vision S Systems like the part # FOS43TASF are compatible with are the Furrion monitors. This part number comes with a compatible camera.

expert reply by: Jameson C

0

Answer 1

Yes, we do have the side marker/cameras available separately. What you are looking for is the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems #FCE48TASL which is designed for use with the 5" Vision S system your…

view full answer...

Answer 2

That is an alternate number that we are aware of for the #FCE48TASL but we decided to keep the old number.

view full answer...

Answer 3

In order to un-pair the camera on your Furrion RV Observation System #FOS05TASF and assign it to the correct designation you will first just need to press the button at the bottom of the camera itself and hold it down for 15 seconds. This will…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 6

I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured also.…

view full answer...

Answer 7

We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…

view full answer...

Answer 8

The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs #DL24239 or…

view full answer...

Answer 9

The 18.5x8.5-8 is actually an old tire size that is not used much anymore. The closest metric size to your existing tire would be 215/60-8. Your wheel most likely has a 5-on 4-1/4 inch bolt pattern (see link), you will want to make sure that the bolt…

view full answer...

Answer 10

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 11

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...