Does Furrion Vision S RV Observation System Integrate into Dash Display of 2020 Silverado 3500

Question

Question:

I hope I can ask this rite. I have a 2020 Silverado 3500 it has the camera system that shows in the bed, at the hitch, and back up. I have a 2019 carbon 5th wheel toy hauler that is equip for the fusion back up camera. On my trucks screen it show two options for in the camper camera and rear back up camera for 5th wheel. So what I am wanting to know is if I buy the fusion camera it comes with extra screen to mount to windshield and not through the trucks system. what can I do to plug the camera on camper in and hook to truck and it works through the trucks screen and I can toggle through the camera views. Thanks

asked by: Stuart R

0

Expert Reply:

I hope we get a solution for what you are wanting but at this time Furrion does not have a way to integrate their Vision S systems like the # FOS05TASF into the Chevy displays. At this time (June 2021) you'd have to stick to using the monitor that attaches to the windshield.

expert reply by: Jameson C

0

Answer 1

While I was unable to confirm the exact dimensions of the Norcold 1200LRIM, I think your current refrigerator to be 63-1/4 inches tall, 32-11/16 inches wide, and 24 inches deep. Please confirm this. The Everchill RV refrigerator with freezer drawer…

view full answer...

Answer 2

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end…

view full answer...

Answer 3

For the 2019-2020 GM fill sized trucks, GM changed the power management software for the trailer connector so it doesn't provide enough power to run a RV camera system like the Furrion Vision S #FOS05TASF. With the addition of the #FR87PR…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 6

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower…

view full answer...

Answer 7

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have…

view full answer...

Answer 8

I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system #FOS05TASF use part #FR79SR. The smaller 4.3 inch size use the part #LC776462. The ball of the #FR79SR is 0.85" or 21.59mm and the ball of…

view full answer...

Answer 9

The #FRCBRKT-BL is actually the mounting bracket but it will still be the Furrion Vision S Wireless RV Backup Camera #FCN48TASF mounted on your bracket. Your camera is compatible with the Replacement 4.3" Monitor for Furrion Vision S…

view full answer...

Does Furrion Vision S RV Observation System Integrate into Dash Display of 2020 Silverado 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching