Correct B&W Turnoverball Underbed Gooseneck Trailer Hitch Install Kit for 2008 Chevy Silverado 3500

Question

Question:

I’m looking for just the side plates for a 2008 Chevy 3500,

asked by: Michael S

0

Expert Reply:

The correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for a 2008 Chevrolet Silverado 3500 is part # BWGNRK1067. If you already have the center section then you can purchase just the install kit part # BWGNRM1067, but not the side plates separately.

expert reply by: Conner L

0

Answer 1

Yes for just the install hardware and rail kit to fit a B and W gooseneck hitch into the bed of your 2004 Chevy Silverado you'd want the part #BWGNRM1067.

view full answer...

Answer 2

Yes, one of the functions of the Edge Pulsar V3 L5P Inline Tuner with Insight CTS3 Monitor #EP54KR is to adjust the governor limit on your 2022 GMC Sierra 3500 6.6L V8 Diesel.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

I spoke to my contact at B&W about the issues you are having with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1067 on your 2008 Chevrolet Silverado 3500. They informed me that the…

view full answer...

Answer 8

The B and W Gooseneck hitch part #BWGNRK1067 is a confirmed fit for your 2007 Chevy Silverado and has a 30k capacity so it would work well for you. I attached an install video for this for you to check out as well.

view full answer...

Answer 9

Installing the Union Tee #AL21838 with your #AL57575 will tie the pressure of the two air bags together. So yes, a shift in a very heavy load like a truck camper will potentially result in air being forced from one into the other. The reason I say…

view full answer...

Answer 10

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

view full answer...

Answer 11

From a function point of view there isn't a huge difference between the two Curt gooseneck hitches #C60712 and #C619-648. You might notice that the EZR has a smaller plate that has larger u-bolts for safety chains and the Double Lock has smaller…

view full answer...

Answer 12

The Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit part #C619-648 hitch ball opening will not line up with the B&W Turnoverball Gooseneck Trailer Hitch hitch ball opening on your 2005 GMC Sierra. The hitch ball…

view full answer...

Correct B&W Turnoverball Underbed Gooseneck Trailer Hitch Install Kit for 2008 Chevy Silverado 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching