Gooseneck Hitch Recommendation for 2007 Chevy Silverado 2500 with 30k Capacity

Question

Question:

Can you tell me which gooseneck hitch will fit a 2007 Chevrolet 2500 Silverado and will be capable of towing a 20,000# GVW gooseneck trailer?

asked by: Gary B

0

Expert Reply:

The B and W Gooseneck hitch part # BWGNRK1067 is a confirmed fit for your 2007 Chevy Silverado and has a 30k capacity so it would work well for you.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

I spoke to my contact at B&W about the issues you are having with the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1067 on your 2008 Chevrolet Silverado 3500. They informed me that the…

view full answer...

Answer 2

Installing the Union Tee #AL21838 with your #AL57575 will tie the pressure of the two air bags together. So yes, a shift in a very heavy load like a truck camper will potentially result in air being forced from one into the other. The reason I say…

view full answer...

Answer 3

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

view full answer...

Answer 4

From a function point of view there isn't a huge difference between the two Curt gooseneck hitches #C60712 and #C619-648. You might notice that the EZR has a smaller plate that has larger u-bolts for safety chains and the Double Lock has smaller…

view full answer...

Answer 5

The Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit part #C619-648 hitch ball opening will not line up with the B&W Turnoverball Gooseneck Trailer Hitch hitch ball opening on your 2005 GMC Sierra. The hitch ball…

view full answer...

Answer 6

The B&W Turnoverball Underbed Gooseneck Trailer Hitch, part #BWGNRK1067 includes the installation kit for the trailer hitch and does include a bracket to re-install the factory braking system as mentioned at the 3 minute 18 second mark on the…

view full answer...

Answer 7

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Gooseneck Hitch Recommendation for 2007 Chevy Silverado 2500 with 30k Capacity

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching