What Oil Do I Use In My Oil Bath Style Hub?

Question

Question:

What type of oil can for the hubs on my 12k dexter axels?

asked by: Joesph

0

Expert Reply:

I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs # XLPROLUBE. This oil is formulated to work with all oil bath style hubs. It is a synthetic 90 weight oil that reduces friction and works well in cold and hot weather applications.

expert reply by: Bud M

0

Answer 1

You'll want to use a gear oil for the Trailer Hub and Drum Assembly #8-219-20 that you referenced. 90 weight or 80w-90 would work well.

view full answer...

Answer 2

Yes, oil hubs and grease hubs use the same cavity to oil and grease, through the center cap. The main difference is a standard grease hub for an EZ lube spindle is grease is pressed into place and maintained through the center cap and an oil bath hub…

view full answer...

Answer 3

The main reason people like oil bath hubs over grease hubs is the oil bath hubs have a less involved maintenance schedule than grease hubs. It is recommended to inspect and repack grease wheel bearings and seals every 12k miles. With oil bath hubs,…

view full answer...

Answer 4

I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle #XLPROLUBE. It is a 90 weight synthetic oil. Dexter bought out Kodiak so this meets their specifications. I've also attached a photo of Dexter's recommended Oil…

view full answer...

Answer 5

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

I'd be happy to help you out, John! To replace the brakes on your 5th wheel trailer you need the etrailer Electric Trailer Brakes #AKEBRK-7-SA which come with a self-adjusting feature so once you initially set them up you won't have to adjust…

view full answer...

Answer 10

The correct set of replacement brake assemblies for your AxleTek 12 inch assemblies is the kit part #AKEBRK-7-SA that you referenced. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self…

view full answer...

Answer 11

In order to verify the spindle dimensions so that you can pick out the correct hub/drum you have to get exact dimensions. For that you need to use a digital caliper like part #PTW80157. For how old your trailer is this is especially important as the…

view full answer...

Answer 12

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

What Oil Do I Use In My Oil Bath Style Hub?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching